Reduction of Combustion-Induced Noise in IDI Diesel Engine
نویسندگان
چکیده
منابع مشابه
Combustion and Vibration Analysis of Idi- Diesel Engine Fuelled With Neat Preheated Jatropha Methyl Ester
Experimentation is conducted on an IDI diesel engine and the results of combustion and vibration on IDI -Diesel engine fueled with the preheated Jatropha Methyl Ester (JME) are presented. The Present research trend is to replace conventional diesel by renewable alternative fuels in view of fast depletion of petroleum reserves and to reduce the exhaust emissions from the engines without altering...
متن کاملExperimental study of combustion noise level in LTC engine
In recent years, promising methods have been used to increase thermal efficiency, reduce nitrogen oxide and particle matter, which can be described as an example of an ethanol fuelled HCCI engine. But despite the many benefits of these engines, they continue to face problems such as increasing carbon monoxide production, unburned hydrocarbon, and producing combustion noise at high loads. In thi...
متن کاملActive Combustion Control of Diesel HCCI Engine: Combustion Timing
We propose a model based control strategy to adapt the injection settings according to the air path dynamics on a Diesel HCCI engine. This approach complements existing airpath and fuelpath controllers, and aims at accurately controlling the start of combustion. For that purpose, start of injection is adjusted based on a Knock Integral Model and intake manifold conditions. Experimental results ...
متن کاملPrediction of Physical Delay Period RiDirect Injection Diesel Engine Combustion
A semi-empirical mathematical model for predicting the physical part of ignition delay period in the combustion of diesel engines with swirl is developed. This model is based on a single droplet evaporation model. The governing equations, namely, equations of droplet motion, heat and mass transfer were solved simultaneously using a Runge-Kutta step by step method. The computation was executed u...
متن کاملCombustion Improvement for Reducing Exhaust Emissions in DI Diesel Engine
Multidimensional modelling of open-cycle process of OM355 engine was developed. Calculations for computational mesh were carried out. The results of the model were validated by experimentally measured in-cylinder pressure and the good agreement between calculations and measurements approved the trustworthy of numerical code. Results included pressure, temperature, emission and Rate of heat rel...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Transactions of the Japan Society of Mechanical Engineers Series B
سال: 1997
ISSN: 1884-8346,0387-5016
DOI: 10.1299/kikaib.63.605_329