REDUKSI RUGI-RUGI PENSAKLARAN PADA KONVERTER DC-DC ZETA DENGAN TEKNIK ZERO VOLTAGE TRANSITION

نویسندگان

چکیده

This paper presents a dc-dc ZETA converter with reduced switching loses at the main switch. Reducing is obtained by application of resonance switch, where turn-on zero voltage and rising turn-off limited capacitor that it’s placed parallel The operational principle proposed has been analyzed under different modes operation. To validate converter, implementation carried out using PSIM software. Simulation result shows switch increase in quadratic function, so current multiplying lower, on other hand can be reduced.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

High Frequency Dc-dc Converter Design Using Zero Voltage Switching

Resonant mode conversion techniques are used nowadays to improve pulse width modulated dcdc converters. Moreover the quest for ever smaller 50 to 500 watts dc-dc switching supplies has led to the development of circuits that operates in 500 KHz -1 MHz range and above. Since the parasitic elements that normally present in a power circuit can be very significant at this frequency, most of the wor...

متن کامل

A Bidirectional DC-DC Convreter with Zero Voltage Switching Capability for Energy Storage Application

In this paper, a bidirectional DC-DC converter with high power density for energy storage application is proposed. The presented converter provides power transfer in both directions only with adjusting phase shift angle. Zero voltage switching (ZVS) in both turn on and turn off moments of all switches is the major capability of the converter that makes it suitable for high power applications. Z...

متن کامل

Zero Voltage and Zero Current Switching dc-dc converter with active clamping technique

The zero voltage and zero current switching dc-dc converter with active clamping technique is proposed. By adding a secondary active clamp and controlling the clamp switch moderately, ZVS (for leading leg switches) and ZCS (for lagging leg switches) are achieved without any lossy components, the reverse avalanche break down of leading-leg IGHTs or the saturable reactor in the primary. Many adva...

متن کامل

A Zero-Voltage and Zero-Current Switching Full Bridge DC–DC Converter With Transformer Isolation

A new primary-side-assisted zero-voltage and zerocurrent switching full bridge dc–dc converter with transformer isolation is proposed. The proposed dc–dc converter uses only one auxiliary transformer and two diodes to obtain ZCS for the leading leg. It has a simple and robust structure, and load current control capability even in short circuit conditions. Possibility of magnetic saturation due ...

متن کامل

High voltage gain DC-DC resonant converter

In this paper, a DC-DC resonant converter with high voltage gain and small size is studied. To reduce the size and weight of this converter, the operating frequency should be as high as possible. In this research, the frequency changes from 120 to 200 kHz. Due to the high operating frequency, it is necessary to reduce the switching losses using soft switching methods. Resonant converters are su...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Power Elektronik: Jurnal Orang Elektro

سال: 2023

ISSN: ['2715-5064']

DOI: https://doi.org/10.30591/polektro.v12i1.4378