Reflected cracks buildups surveying and process simulation in double-layer asphalt-concrete systems

Effects of Recycled Concrete Aggregates on Properties of Asphalt Concrete

Characterisation of Asphalt Concrete Using Nanoindentation

In this study, nanoindentation was conducted to extract the load-displacement behaviour and the nanomechanical properties of asphalt concrete across the mastic, matrix, and aggregate phases. Further, the performance of hydrated lime as an additive was assessed across the three phases. The hydrated lime containing samples have greater resistance to deformation in the mastic and matrix phases, in...

Use of Recycled and Waste Fibers in Asphalt Concrete

A significant problem associated with asphalt concrete mixtures is the lack of durability resulting from an inadequate asphalt cement content. Additional asphalt cement added to increase durability results in flushing, bleeding and a significant loss In stability. Fibers have been used in stone matrix asphalt and open-graded friction course pavements successfully throughout Europe to allow high...

Cracks Analysis in Zavin Concrete Dam Using Fracture Mechanics Approach

Most of the existing concrete dams are subjected to cracking. These cracks are caused by various factors such as construction practices, curing, loads and volume change of mass concrete which reduce the efficiency, failure or instability of concrete dams. Using fracture mechanics as a new method to estimate stability and durability of concrete dams is recommended in scientific publications in w...

The asphalt paving process

Language: English The Challenge At the outset the asphalt paving process seems to be simple. Trucks deliver hot mix asphalt from plants to the construction site. There the asphalt is loaded on asphalt pavers that evenly spread the asphalt. Finally, compactors compact the asphalt to its required density. Despite this relatively structured process our research shows that there are significant dis...