Reinforced Matrix Syntactic Foams Filled with Ceramic Hollow Spheres
نویسندگان
چکیده
Abstract Metal matrix syntactic foams are cellular materials in which the is metal and within that non-metallic cells formed by filler material. These have low density, besides that, they high compressive strength energy absorption. The main goal was to improve these properties reinforcing with ceramic grains. During experiment, molten A356 aluminium (7Si-0,3Mg) infiltrated between mixture of reinforcement specimens were produced low-pressure infiltration. Different used: aluminium-oxide three different grain sizes colour designations one type silicon carbide. After heat-treatment, standardised compression tests executed on specimens. results compared non-reinforced samples.
منابع مشابه
Predicting Mechanical Properties of Metal Matrix Syntactic Foams Reinforced with Ceramic Spheres
A model is presented that predicts peak stress, minimum stress, average stress, densification strain, and composite density in order to determine the energy absorption per unit volume and energy absorption per unit mass of metal matrix syntactic foams reinforced with hollow ceramic spheres subjected to unconstrained compression testing. Comparison of predictions to experimental data for Al-A206...
متن کاملNovel syntactic foams made of ceramic hollow micro-spheres and starch – theory, structure and properties
Novel syntactic foams made of starch and ceramic hollow micro-spheres were developed. Foams of four different micro-sphere size groups were manufactured with either preor post-mould gelatinisation process. Compressive failure behaviour and mechanical properties were evaluated. Not much difference in failure behaviour or in mechanical properties between the two processes (preand post-mould gel) ...
متن کاملCompressive Behavior and Microstructural Characteristics of Iron Hollow Sphere Filled Aluminum Matrix Syntactic Foams
Iron hollow sphere filled aluminum matrix syntactic foams (AMSFs) were produced by low pressure, inert gas assisted infiltration. The microstructure of the produced AMSFs was investigated by light and electron microscopy, extended by energy dispersive X-ray spectroscopy and electron back-scattered diffraction. The investigations revealed almost perfect infiltration and a slight gradient in the ...
متن کاملDevelopment and characterization of epoxy syntactic foam filled with epoxy hollow spheres
The present study focuses on the development and characterization of epoxy syntactic foam filled with epoxy hollow spheres (ESF/EHoS). The epoxy syntactic foam (ESF) was produced by embedding epoxy hollow spheres (EHoS) into a mixture of epoxy-hardener and 3% KOH solution. An innovative approach and simple procedure was implemented in the preparation of the EHoS where expanded polystyrene (EPS)...
متن کاملAmorphous Mg-based metal foams with ductile hollow spheres
To date, high compressive ductility and energy absorption have been achieved in amorphous metal foams based on high-toughness Pdand Zr-based metallic glasses and are known to result from two extrinsic toughening mechanisms: bending of struts and shear band arrest by pores. We study here a syntactic amorphous metallic foam produced by infiltration of a bed of hollow crystalline iron spheres with...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Acta Materialia Transylvanica
سال: 2022
ISSN: ['2668-1366', '2601-1883']
DOI: https://doi.org/10.33924/amt-2022-01-05