Relationship among fracture toughness, fracture mode and tensile properties of Al-Li alloys.
نویسندگان
چکیده
منابع مشابه
Prediction of Mode II of Fracture Toughness in Laminate Composites
In this paper, effects of ply orientation of adjacent plies with (ϕ//θ) interfaces on mode II critical strain energy release rate (fracture toughness) of multidirectional (MD) laminate has been studied. Ply orientation of adjacent plies is one of the most important parameters affects the mode II critical strain energy release rate () in the initiation of the delamination. To study this paramet...
متن کاملEffect of Rock Fracture Filling on Mode I and II Fracture Toughness
This paper focuses on some fracture toughness tests performed on the pre-cracked Brazilian specimens of rock-like materials. Also the effect of rock fracture filling on the fracture toughness was considered experimentally. Fracture toughness is a key parameter for studying the crack propagation and fragmentation processes in rock structures. Fracture mechanics is an applicable tool to improve ...
متن کاملEffect of Microstructural Variations on the Tensile and Fracture Toughness Properties of Alloy 718 Welds
The effect of microstructural variations on the tensile and fracture toughness properties of Alloy 718 welds is reviewed. The microstructural parameters surveyed include heat treatment, longterm thermal aging and neutron irradiation. The two heat treatments that were characterized include the conventional heat treatment, per ASTM B637, and a modified heat treatment designed to improve the tough...
متن کاملThe 4 K Tensile and Fracture Toughness Properties of a Modified 316LN Conduit Alloy
The 45-T Hybrid magnet will employ Cable-In-Conduit Conductor (CICC) technology for the windings of the Nb3Sn and NbTi coils. The conduit steel must retain high strength and fracture toughness at 4 K, following the Nb3Sn reaction heat treatment. The design requirements call for a 4 K yield strength exceeding 1000 MPa and a 4 K fracture toughness (KIc) greater than 110 MPa m -0.5. We report the ...
متن کاملA model for predicting fracture mode and toughness in 7000 series aluminium alloys
A model is proposed, which predicts the toughness of 7000 series aluminium alloys in a variety of situations, including two alloy compositions, different quench rates from the solution treatment temperature and ageing states from underaged to overaged. The model is derived in three steps. The energy dissipated by transgranular fracture is first calculated, using a simplified cohesive zone appro...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Japan Institute of Light Metals
سال: 2001
ISSN: 0451-5994,1880-8018
DOI: 10.2464/jilm.51.228