Removal of Arsenic(III) from Water with a Combination of Graphene Oxide (GO) and Granular Ferric Hydroxide (GFH) at the Optimum Molecular Ratio

نویسندگان

چکیده

The occurrence of arsenic in water is a global problem for public health. Several removal technologies have been developed from water, and adsorption onto iron oxy-hydroxides the most widely used technique. Granular ferric hydroxide (GFH) has mainly As(V) removal, but it disadvantage that can create with residual concentration water. Moreover, graphene oxide (GO), which contains large amount reactive oxygen, exhibits high adsorbing capacity. In this study, combined use GO GFH as adsorbent materials different molar ratios was investigated order to achieve maximum As(III) aqueous solutions. effect adsorbent’s dosage, pH value, contact time, initial As(III), GO/GFH examined. As depicted, presence enhances GO. particular, ratio 2:1 (i.e., 0.2 g/L 0.1 GFH) chosen optimal at value 7.0 ± 0.1, while percentage increased 10 % (absence 90% simultaneous addition GFH. Freundlich isotherm pseudo-second-order kinetic models described experimental data adequately highest capacity achieved 22.62 μg/g.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Application of Granular Ferric Hydroxide in Removal of Nitrate from Aqueous Solutions

The aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (GFH). The effect of factors such as initial concentration of nitrate, pH, contact time, and adsorbent mass were determined. The study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. It was found ...

متن کامل

application of granular ferric hydroxide in removal of nitrate from aqueous solutions

the aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (gfh). the effect of factors such as initial concentration of nitrate, ph, contact time, and adsorbent mass were determined. the study was done in laboratory–scale in which synthetic nitrate solutions in a batch reactor were placed in contact with the adsorbent to model adsorption kinetics. it was found ...

متن کامل

Fabrication of ultrathin graphene oxide-coated membrane with hydrophilic properties for arsenate removal from water

Terms and conditions of current drinking water quality standards, including reducing the maximum arsenic concentration from 50 μgl-1 to 10 μgl-1 and predicted stricter standards in future, reveals the necessity for development of new technologies. This study aimed to prepare and evaluate a new nanocomposite membrane using graphene oxide (GO) thin layer to remove arsenic (v) from water. To fabri...

متن کامل

nitrate removal from water using granules ferric hydroxide absorbent

background: one of the major sources of drinking water contamination is nitrate. nitrate concentrations of more than the standard levels (45mgl -1 based on nitrate) could cause methemoglobinemia in children. the aim of this study is to investigate the nitrate adsorption on granular ferric hydroxide (gfh). also in this study, the effect of factors such as initial concentration of nitrate, contac...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: C

سال: 2023

ISSN: ['2311-5629']

DOI: https://doi.org/10.3390/c9010010