Removal of Cd(II) from Aqueous Solution by Using Arachis hypogea as Low Cost Biosorbent

Removal of Basic Blue 159 from Aqueous Solution Using Banana Peel as a Low-Cost Adsorbent

In this paper, the adsorption of Basic Blue159 (BB159) onto banana peel as a low-cost material was studied. At first, the banana peel was sieved. Later, banana peel particles were characterized by field emission scanning electron microscopy (FESEM), energy dispersive x-ray spectroscopy (EDXS) and Fourier Transform Infrared (FTIR) techniques. Batch adsorption experiments were carried out as a fu...

Coal Ash as a Low Cost Adsorbent for the Removal of Xylenol Orange from Aqueous Solution

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

removal of basic blue 159 from aqueous solution using banana peel as a low-cost adsorbent

Removal of Methyl Orange Dye from Aqueous Solution by a Low-Cost Activated Carbon Prepared from Mahagoni (Swietenia mahagoni) Bark

This study utilized Swietenia mahagoni bark–a wood processing industry waste, for the preparation of activated carbon, and then investigated for the removal of methyl orange (MO) dye by the Swietenia mahagoni bark activated carbon (SMBAC). The effect of pH (3–10), adsorbent dose (1–30 g/L), initial MO dye concentration (10–100 mg/L), and contact time (1–240 min) were evaluated...

Removal of Methyl Orange Dye from Aqueous Solution by a Low-Cost Activated Carbon Prepared from Mahagoni (Swietenia mahagoni) Bark

This study utilized Swietenia mahagoni bark–a wood processing industry waste, for the preparation of activated carbon, and then investigated for the removal of methyl orange (MO) dye by the Swietenia mahagoni bark activated carbon (SMBAC). The effect of pH (3–10), adsorbent dose (1–30 g/L), initial MO dye concentration (10–100 mg/L), and contact time (1–240 min) were evaluated...