Removal of Ionic Liquids from Oil Sands Processing Solution by Ion-Exchange Resin

Uranium Removal from Aqueous Solution Using Ion-Exchange Resin DOWEX® 2x8 in the Presence of Sulfate Anions

The current study was attributed to uranium (VI) ions adsorption using a anion exchanger resin, Dowex®2x8, in the presence of sulfate anions. Evaluation of operational parameters including contact time, pH, initial concentration of uranium ions, and presence of various anions (including phosphate, sulfate, chloride, fluoride, and nitrate) in the solution was assessed on sorption performance of ...

Removal of Copper from Aqueous Solution by Ion Exchange Resins

Adsorptive Removal of Al, Zn, Fe, Cr and Pb from Hydrogen Peroxide Solution by IR-120 Cation Exchange Resin

  Adsorption of cations Al, Zn, Fe, Cr and Pb from aqueous solution of hydrogen peroxide using IR-120 cation-exchange resin was studied. The removal percentage of the cations was examined by varying experimental conditions (such as pH of the hydrogen peroxide solution, temperature, contact time and dosage of adsorbent) i...

Removal of Ca(II) and Mg(II) from potassium chromate solution on Amberlite IRC 748 synthetic resin by ion exchange.

Experimental measurements have been made on the batch ion exchange of Ca(II) and Mg(II) from potassium chromate solution using cation exchanger of Amberlite IRC 748 as K+ form. The ion exchange behavior of two alkaline-earth metals on the resin, depending on contact time, pH, temperature and resin dosage was studied. The adsorption isotherms were described by means of the Langmuir and Freundlic...

Conversion of Soybean Oil into Ion Exchange Resins: Removal of Copper (II), Nickel (II), and Cobalt (II) Ions from Dilute Aqueous Solution Using Carboxylate- Containing Resin

An ion-exchange resin containing carboxylic acid groups was prepared by reaction of epoxidized soybean oil with triethylene tetramine, followed by hydrolysis of glycerides by using sodium hydroxide solution. The cation exchange capacity of the resins was determined to be 3.50 mequiv/g. The adsorption capacity for Cu , Ni , and Co on the obtained resin at pH 5.0 was found to be 192, 96, and 78 m...