Research of Non-mechanical Beam Scanning Technology

نویسندگان

چکیده

Abstract Laser beam scanning technology has been widely used in various fields such as LIDAR, photoelectric detection and space optical communication, etc. Mechanical problems inflexibility low rate. This paper introduces the basic principles of acoustic-optical scanning, electro-optical phased array MEMS analyses advantages disadvantages several methods main application scenarios, finds that current is developing towards large angle, high accuracy, fast response miniaturization, among which liquid crystal are relatively mature. The angle LCD can reach ±10°, 6.6°*4.4°, a broad development prospect.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Mechanical Response of a Piezoelectrically Sandwiched Nano-Beam Based on the Non-Local Theory

This article deals with the mechanical analysis of a fixed-fixed nano-beam based on nonlocal elasticity theory. The nano-beam is sandwiched with two piezoelectric layers through it’s upper and lower sides. The electromechanical coupled equations governing the problem are derived based nonlocal theory considering to Euler-Bernoulli beam assumptions and based on the nonlocal piezoelectricity acco...

متن کامل

Beam alignment for scanning beam interference lithography

By interfering two small diameter Gaussian laser beams, scanning beam interference lithography ~SBIL! is capable of patterning linear gratings and grids in resist while controlling their spatial phase distortions to the nanometer level. Our tool has a patterning area that is up to 300 mm in diameter. The motive for developing SBIL is to provide the semiconductor industry with a set of absolute ...

متن کامل

Line-scanning Brillouin microscopy for rapid non-invasive mechanical imaging

Brillouin spectroscopy probes the mechanical properties of material by measuring the optical frequency shift induced by photon-phonon scattering interactions. In traditional configurations, Brillouin spectrometers measure only one point of the sample at a time. This results in long acquisition times for mechanical imaging of large areas. In this work, we demonstrate a parallel detection configu...

متن کامل

Research on Key Technology of Cloud Design for Mechanical Equipment

In order to carry out rapid response of design of products, aimed at problems existed in realm cooperation during the design process of mechanical equipment, this paper proposes design mode of mechanical equipment based on cloud environment, implementation method of cloudy domain analysis on design demand and mapping technology, serial expand strategy on discrete design resource and strategy in...

متن کامل

Microstructure and Mechanical Strength of Surface Ods Treated Zircaloy-4 Sheet Using Laser Beam Scanning

Zirconium alloys have been used as a fuel cladding material for a long time because they have good corrosion resistance and irradiation stability in a reactor environment. However, it was recognized that the severe oxidation and creep ballooning behaviors of zirconium alloy cladding tubes at an accident condition of a nuclear reactor have to be considered to improve nuclear plant safety after t...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of physics

سال: 2023

ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']

DOI: https://doi.org/10.1088/1742-6596/2501/1/012019