Research of Response Difference on Coal Cutting Load under Different Cutting Parameters

Study on Roadheader Cutting Load at Different Properties of Coal and Rock

The mechanism of cutting process of roadheader with cutting head was researched, and the influences of properties of coal and rock on cutting load were deeply analyzed. Aimed at the defects of traditional calculation method of cutting load on fully expressing the complex cutting process of cutting head, the method of finite element simulation was proposed to simulate the dynamic cutting process...

LASER CUTTING PARAMETERS The laser cutting parameters are dependent on the beam characteristics, the cutting rate

The laser cutting parameters are dependent on the beam characteristics, the cutting rate required, the composition and thickness of the material to be cut, and the desired cut edge quality. The laser cutting process and cut quality depend upon the proper selection of laser and workpiece parameters. Deficiencies in cutting quality may be related to the slow process drifts and disturbances that a...

Experimental Study of the Effect of Laser-Cutting Process Parameters on Heat Distribution and Cutting Edge Quality of Steel Sheets

This study aimed to evaluate Laser-cutting process of Mild Steel St37 sheets with two different thicknesses. In order to evaluate the quality of cutting edge and the depth of the area affected by the heat, several tests were conducted to determine the effect of parameters such as Laser power, Laser beam movement speed and pressure of axillary gas on the quality of cutting edge and the depth of ...

Response of typha latiffolia to cutting competition and glyphosate under field conditions

Multi response optimization of process parameters based on Taguchi—Fuzzy model for coal cutting by water jet technology

The process of material cutting and fracture by high velocity water jets is a complex series of phenomena which may involve compression, tension, shear, erosion, wears, cracking, wave propagation, and cavitations damage. This makes the exact analysis of the jet cutting process to be very complicated. The problem of water jet coal cutting is a multiresponse problem. There are two output variable...