Research on a Five-Axis Machining Center Worktable with Bionic Honeycomb Lightweight Structure
نویسندگان
چکیده
منابع مشابه
Bionic Design for Column of Gantry Machining Center Using Honeycomb Structures
With the aim to improve the machining precision of a gantry machining center, bionic optimization design for ribs structure of its column was investigated. Firstly, based on the analysis of honeycomb structures, three kinds of bionic columns were discussed and simulated by finite element analysis method. The column structure with the best comprehensive performance was achieved according to the ...
متن کاملOptimal grids for five-axis machining
This paper presents a new grid generation method for tool path planning for five-axis machining based on minimization of the kinematics error. First, the procedure constructs a space-filling curve so that the scallops between the resulting tracks of the tool do not exceed a prescribed tolerance. At the second stage (which is the subject of this paper) a one-dimensional grid along the space-fill...
متن کاملRuled Surface Machining on Five-Axis CNC Machine Tools
To achieve high precision and high productivity in machining sculptured surfaces, a new architecture for a five-axis CNC interpolator for machining ruled surfaces was developed and demonstrated on a milling machine. The objective of the five-axis interpolator is to continuously maintain the milling cutter axis in parallel with the straight lines of the ruled surface. The cutter position and ori...
متن کاملMinimization of the kinematics error for five-axis machining
Kinematics of a particular five-axis milling machine can drastically change the machining accuracy. Therefore, the reduction of the kinematics error is an important problem associated with the tool path planning. Our newoptimizationmethod employs a closed formof the kinematics error represented as a function of the positions of the cutter contact points. The closed form is derived from the inve...
متن کاملGeneral stiffness model for five-axis CNC machining
Five-axis CNC machining has become an important method for processing thin-walled parts. However, compared with the traditional three-axis machine system, the tool path planning becomes more difficult especially in high-speed and accuracy machining process. In this paper, taking into consideration the rigidity establishes a general stiffness model in order to increase the surface quality, restr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials
سال: 2020
ISSN: 1996-1944
DOI: 10.3390/ma14010074