Research on Boundary Features Extraction and Reconstruction for Tire Tread Patterns
نویسندگان
چکیده
منابع مشابه
Rubber friction for tire tread compound on road surfaces.
We have measured the surface topography and calculated the surface roughness power spectrum for an asphalt road surface. For the same surface we have measured the friction for a tire tread compound for velocities 10(-6) m s(-1) < v < 10(-3) m s(-1) at three different temperatures (at -8 °C, 20 °C and 48 °C). The friction data was shifted using the bulk viscoelasticity shift factor a(T) to form ...
متن کاملOptimization of an Optical Test Bench for Tire Properties Measurement and Tread Defects Characterization
Tire characteristics and behavior are of great importance in vehicle dynamics since the forces transmitted in the tire-road contact are the main contributors to global vehicle performance. Several research groups have focused on the study and modeling of tires. Some of the most important factors that need to be known are tread characteristics and pressure distribution in the tire-ground contact...
متن کاملDetailed vs. Simplified Tread Tire Model for Steady-State Rolling Analysis
This paper deals with the level of detail that is necessary for representation of tread pattern in finite element tire models. Different methods for creation of tire tread mesh are systematized by two different criteria: the most common approaches and the finite element analysis type. Some of the representative approaches found in literature are given in more detail and their advantages and dis...
متن کاملResearch on Real-time Identification for Tire Failure
Abstract Sudden tire failure (a blowout) is a major cause of traffic accidents, many of them involving fatalities. If the automobile can quickly identify that a blowout has occurred, the braking system can be programmed to carry out braking and stability control to slow down the vehicle steadily. Hence, timely identification of a blowout or severe leakage is a key enabler of using the braking s...
متن کاملtechnical and legal parameters for determination of river boundary,( case study haraz river)
چکیده با توسعه شهر نشینی و دخل و تصرف غیر مجاز در حریم رودخانه ها خسارات زیادی به رودخانه و محیط زیست اطراف آن وارده می شود. در حال حاضر بر اساس آئین نامه اصلاح شده بستر و حریم رودخانه ها، حریم کمی رودخانه که بلافاصله پس از بستر قرار می گیرد از 1 تا20 متر از منتهی الیه طرفین بستر رودخانه تعیین، که مقدار دقیق آن در هر بازه از رودخانه مشخص نیست. در کشورهای دیگر روشهای متفاوتی من جمله: درصد ریسک...
15 صفحه اولذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Mechanical Engineering
سال: 2018
ISSN: 0577-6686
DOI: 10.3901/jme.2018.03.137