Research on Electro-chemical Machining Using Sodium Nitrate Solution
نویسندگان
چکیده
منابع مشابه
Optimization of Chemical Texturing of Silicon Wafers Using Different Concentrations of Sodium Hydroxide in Etching Solution
In this paper, the morphology of chemically etched silicon with various concentration is reported. The surface of Silicon (100) has pyramidal structures which can be used for anti-reflection applications in solar cells. Pyramidal structures can capture incident sun light therefore can enhance the efficiency of silicon solar cells. The structure of silicon pyramid was studied using scanni...
متن کاملBatch Mode Micromanufacturing Based on Micro Electro-discharge Machining and Micro Ultrasonic Machining for Micro Electro Mechanical Systems (mems)
Metal alloys have material properties that are very appealing for micro electro mechanical systems (MEMS), but present a challenge for process integration within a lithographic manufacturing sequence of the type used in the semiconductor industry. The batch-mode micro electrodischarge machining (μEDM) discussed here uses lithographically-fabricated electrode arrays with high density and high un...
متن کاملMicro-Electro-Discharge Machining Technologies for MEMS
Advances in micromachining techniques have led to the evolution of micro-electromechanical systems (MEMS). These techniques are typically based on semiconductor manufacturing processes, which offer various advantages such as batch manufacturing of miniaturized devices and monolithic integration of microelectronics with the devices. Surface micromachining has been used to construct complex micro...
متن کاملUltrasonic Vibration Assisted Electro-Discharge Machining
An ultrasonic vibration has been superposed on the normal electrode movement to increase the flushing effect during a micro electro-discharge machining (EDM) process. A systematic study on the effects of ultrasonic vibration on the EDM performance for fabricating microholes in Nitinol has been completed. The introduction of ultrasonic vibration to the microEDM process has more than 60 times inc...
متن کاملElectro Chemical Machining with Oscillating Tool Electrode: Estimation of Maximum Pressure
The optimal design of Electro Chemical Machining (ECM) processes is of significant technological importance. In the present work ECM processes with an oscillating tool electrode are considered. It is motivated by the fact that the workpiece electrode may suffer damage or may even fail if the applied load due to hydrodynamic forces is too large. A simple formula is developed for the reaction for...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Society of Precision Engineering
سال: 1977
ISSN: 0374-3543
DOI: 10.2493/jjspe1933.43.603