Residual displacement and residual strain measurement for steel frame under seismic load by integrated dot centroid tracking method
نویسندگان
چکیده
منابع مشابه
Plasticity Effect on Residual Stresses Measurement Using Contour Method
Residual stresses have become an important player in the field of the structural integrity for many years. Having an exact knowledge of residual stress distributions can be essential in designing the engineering components as unexpected failures are inevitable where such stresses are ignored. There are many residual stresses measurement techniques including destructive and non-destructive ones...
متن کاملResidual Stresses Measurement of a Quenched Cylinder using Slitting Method
Residual Stress measurement has gained interests among researchers for many years due to its great influence on the structural integrity. Slitting method is one of the destructive techniques that relies on the introduction of an increasing cut to a part containing residual stresses. Similar to all other mechanical strain relief techniques, slitting also suffers from its shortcomings during the ...
متن کاملMeasurement of residual stress in quenched 1045 steel by the nanoindentation method
Article history: Received 12 September 2010 Accepted 27 September 2010 In this paper, the residual stress in quenched AISI 1045 steel was measured by a recently developed nanoindentation technique. Depth control mode was adopted to measure the residual stress. It was found that residual compressive stress was generated in the quenched steel. The material around nanoindents exhibits significant ...
متن کاملResidual Stresses Measurement in Hollow Samples Using Contour Method
Residual stresses are created usually undesirably during manufacturing processes, including casting, welding, metal forming, etc. Residual stresses alone or in combination with other factors can cause the destruction and fracture of components or significant decline in their service life. Therefore, it is crucial to measure the residual stresses. Contour method is a destructive testing method c...
متن کاملNumerical and Experimental Study of Residual Stress Measurement and Thickness Distribution of T-shape Steel Tube Produced by Tube Hydroforming
Tube hydroforming (THF) process is used to produce the complex components from the initial cylindrical tubes. In this paper, T- shape component was formed using a tube hydroforming machine and the residual stresses of hydroformed tube was determined by hole drilling method. Subsequently, the thickness distribution and residual stresses of final tube were investigated using experimental and fini...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Measurement
سال: 2019
ISSN: 0263-2241
DOI: 10.1016/j.measurement.2019.05.066