Residual Flexural Capacity of Corroded Prestressed Reinforced Concrete Beams
نویسندگان
چکیده
منابع مشابه
Nonlinear Damping Identification in Precast Prestressed Reinforced Concrete Beams
This article presents a damage detection method for prestressed reinforced concrete (PRC) elements based on free vibration tests and nonlinear damping identification. Integrated static and dynamic experiments were carried out on three precast PRC beam specimens. The static loading induced different levels of damage to the beams. At each damage level, impulsive loading was applied to the beams a...
متن کاملModelling the loss of steel-concrete bonds in corroded reinforced concrete beams
The existing stochastic models for deterioration of reinforced concrete structures is extended by adding modelling of “loss of bond” due to corrosion between the reinforcement bars and the surrounding concrete.
متن کاملResidual Strengths of Reinforced Concrete Beams With Heavy Deterioration
This study focused on the residual strengths of reinforced concrete beams with heavy deterioration. This work is based on experimental investigation of reinforced concrete beams naturally corroded over 30 years. Visual inspection was firstly conducted and the concrete cracking, spalling of concrete cover, corrosion of rebar were recorded. Material tests on concrete and corroded rebar were also ...
متن کاملReliability Analysis of Corroded Reinforced Concrete Beams Using Enhanced HL-RF Method
Steel corrosion of bars in concrete structures is a complex process which leads to the reduction of the cross-section bars and decreasing the resistance of the concrete and steel materials. In this study, reliability analysis of a reinforced concrete beam with corrosion defects under the distributed load was investigated using the enhanced Hasofer-Lind and Rackwitz-Fiessler (EHL-RF) method base...
متن کاملDevelopment of Shear Capacity Equations for Rectangular Reinforced Concrete Beams
The problem of shear is not yet fully understood due to involvement of number of parameters. Designers are extra careful about shear, especially in beams and consequently higher safety factors are used in shear design. Several equations are available in literature to determine the shear capacity of beams, i.e. ACI equation, Zsutty equation and KIM & White equation. To verify the application of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2021
ISSN: 2075-4701
DOI: 10.3390/met11030442