Residual Stresses Caused by Drilling Operation in Polycarbonate Plates
نویسندگان
چکیده
منابع مشابه
Quantification of Residual Stresses in the Weld by the Hole-drilling Method
Many failures of supporting structures or machines are not caused only by stresses that are invoked by loading, but they often result due to residual stresses. Time needed for reparation of equipment and production losses are important factors, but much more serious are possible injuries or death of people. Residual stresses occur also in the structures without loadings. They arise mostly due t...
متن کاملMeasurement of Residual Stresses by the Hole-Drilling* Strain Gage Method
For technical support, contact [email protected] www.vishaymg.com 19 Revision 15-Aug-07 I. Residual Stresses and Their Measurement Residual (locked-in) stresses in a structural material or component are those stresses that exist in the object without (and usually prior to) the application of any service or other external loads. Manufacturing processes are the most common causes of r...
متن کاملAssessment of the Exit Defects in Carbon Fibre-Reinforced Plastic Plates Caused by Drilling
This paper investigates the formation of the exit defects in carbon fibre-reinforced plates and characterizes their features in terms of drilling conditions. It was found that spalling and fuzzing are the major mechanisms of exit defects. The spalling, consisting of a main region and a secondary region, is caused by chisel and cutting edge actions, in which the former plays a key role. The fuzz...
متن کاملStructural changes in glassy polycarbonate induced by cyclic stresses
Glassy polycarbonate was subjected to cyclic stresses and the changes in its structure were studied by DSC, positronium annihilation lifetime spectroscopy (PALS), and SAXS. On increased exposure to cyclic loading, the enthalpy overshoot near T s increased in a manner similar to increasing physical aging. However, the 'hole' size as revealed by PALS increased, unlike physical aging. SAXS reveals...
متن کاملResidual stresses in ground components caused by coupled thermal and mechanical plastic deformation
The purpose of this paper is to understand the combined effect of thermal and mechanical plastic deformation on residual stresses in ground components. The interactions between a grinding wheel and a workpiece, including both thermal and mechanical interaction, are simulated by triangular surface loads moving with the table speed of grinding. Cooling is modelled by a uniform convection over the...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Society of Materials Science, Japan
سال: 1974
ISSN: 1880-7488,0514-5163
DOI: 10.2472/jsms.23.615