Residues characterisation from the fluidised bed combustion of East London’s solid recovered fuel

Fluidised bed drying of soybeans.

The fluidised bed drying characteristics of soybeans at high temperatures (110-140 degrees C) and moisture contents, 31-49% dry basis, were modelled using drying equations from the literature. Air speeds of 2.4-4.1 m/s and bed depths from 10 to 15 cm were used. The minimum fluidised bed velocity was 1.9 m/s. From a quality point of view, fluidised bed drying was found to reduce the level of ure...

Thermogravimetric and kinetic analysis of the decomposition of Solid Recovered Fuel from municipal solid waste

Hydrolysis and composition of recovered fibres fractionated from solid recovered fuel.

Fibres fractionated from solid recovered fuel (SRF), a standardised market combustion fuel produced from sorted waste, were considered as a source of lignocellulosic fermentable sugars. The fibre yield from four samples of SRF was 25-45%, and the separated material consisted of 52-54% carbohydrates, mainly glucan, with a high content of ash (12-17%). The enzymatic digestibility of recovered fib...

Comparison of coal/solid recovered fuel (SRF) with coal/refuse derived fuel (RDF) in a fluidized bed reactor.

An experimental study was undertaken to compare the differences between municipal solid waste (MSW) derived solid recovered fuel (SRF) (complying with CEN standards) and refuse derived fuel (RDF). Both fuels were co-combusted with coal in a 50 kW fluidized bed combustor and the metal emissions were compared. Synthetic SRF was prepared in the laboratory by grinding major constituents of MSW such...

Sulfur Release from Cement Raw Materials during Solid Fuel Combustion

During combustion of solid fuels in the material inlet end of cement rotary kilns, local reducing conditions can occur and cause decomposition of sulfates from cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, which may cause deposit formation in the kiln system. SO2 release from cement raw materials during combustion of solid f...