Resistivity of Cu-Ni/Cu/Cu-Ni Multilayer Materials
نویسندگان
چکیده
منابع مشابه
Enthalpies of Formation of (Cu,Ni)3Sn, (Cu,Ni)6Sn5-HT and (Ni,Cu)3Sn2-HT
Standard enthalpies of formation of ternary phases in the Cu-Ni-Sn system were determined along sections at 25, 41 and 45.5 at.% Sn applying tin solution drop calorimetry. Generally, the interaction of Ni with Sn is much stronger than that of Cu with Sn. Along all sections the enthalpy of formation changes almost linearly with the mutual substitution of Cu and Ni within the respective homogenei...
متن کاملTEXTURE AND RESISTIVITY OF Cu and DILUTE Cu ALLOY FILMS
Annealing of dilute binary Cu(Ti), Cu(In), Cu(Al), Cu(Sn), Cu(Mg), Cu(Nb), Cu(B), Cu(Co) and Cu(Ag) alloy films resulted in the strongest <111> fiber texture for Cu(Ti) and the lowest resistivity for Cu(Ag). The behavior of the alloy films was compared and contrasted with that for a pure evaporated Cu film. Electron beam evaporated films with compositions in the range of 2.0-4.2 at% and thickne...
متن کاملMolecular dynamics simulation of nanoindentation on Cu/Ni nanotwinned multilayer films using a spherical indenter
We performed molecular dynamics simulation of nanoindentation on Cu/Ni nanotwinned multilayer films using a spherical indenter, aimed to investigate the effects of hetero-twin interface and twin thickness on hardness. We found that both twinning partial slip (TPS) and partial slip parallel with twin boundary (PSPTB) can reduce hardness and therefore should not be ignored when evaluating mechani...
متن کاملAcoustic Wave propagation through multilayer Thue-Morse structures containing two, three and four materials of Cu, Al, MgO and Pb
In this paper, the acoustic wave propagation in multilayer Thue-Morse structures has theoretically been studied. The composing layers were assumed do be Cu, Al, Mgo and Pb materials. Two, three or four different materials have been used in a typical structure. By using a perpendicular incident acoustic wave, the transmission coefficient was calculated and then by its old, the frequency gaps was...
متن کاملElectrochemical fabrication of Cu/Pd multilayer nanowires in polycarbonate template
In this work,copper/palladium (Cu/Pd) multilayer nanowires were successfully prepared by electrodeposition method using polycarbonate template. The fabrication of Pd/Cu multilayer nanowires was controlled by analyzing the current–time transient during electrodeposition using potentiostat. The morphological properties of the nanowires were studied by scanning electron microscopy (SEM) and resu...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals
سال: 2007
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet.71.270