Resonantly pumped high efficiency Ho:GdTaO4 laser
نویسندگان
چکیده
منابع مشابه
Efficiency and Threshold Analysis of Resonantly Diode-Laser-Pumped 1.6-μm Er:YAG Laser
Public reporting burden for the collection of information is estimated to average 1 hour per response, including the time for reviewing instructions, searching existing data sources, gathering and maintaining the data needed, and completing and reviewing the collection of information. Send comments regarding this burden estimate or any other aspect of this collection of information, including s...
متن کاملHigh-efficiency diode-pumped Tm:YAG ceramic laser
A high efficient Tm:YAG ceramic laser at 2007 nm pumped by a diode laser was demonstrated. The laser performances with Tm doping concentrations of 4 at.% and 6 at.% were comparatively analyzed. The continuous-wave (CW) laser powers up to 2.11 W and 1.68 W have been obtained for Tm:YAG ceramics at 6 at.% and 4 at.% doping levels, corresponding to the slope efficiencies of 43.6% and 53.8% respect...
متن کاملContinuous-wave singly resonant optical parametric oscillator pumped by a single-frequency resonantly doubled Nd:YAG laser.
We report what is to our knowledge the first demonstration of a continuous-wave singly resonant optical parametric oscillator based on potassium titanyl phosphate. The pump source used is a single-frequency resonantly doubled Nd:YAG laser. By double passing the pump through the crystal, we achieved a minimum oscillation threshold of 1.4 W. With 3.2 W of incident pump power, a maximum 1.07 W of ...
متن کاملResonantly pumped 1.645 μm high repetition rate Er:YAG laser Q-switched by a graphene as a saturable absorber.
A fiber laser resonantly pumped 1.645 μm passively Q-switched Er:YAG laser is reported. Graphene on a silicon carbide was used as the saturable absorber for the Q-switching. The pulse energy of the 1.645 μm Q-switched Er:YAG laser was 7.05 μJ, with a pulse repetition rate of 35.6 kHz and an average output power of 251 mW.
متن کاملHigh energy directly pumped Ho:YLF laser
The most commonly used crystal architecture to produce 2μm laser is codoping Ho and Tm into a single host crystal. In this method, the stored energy transfer from the Tm F4 to the Ho I7 manifold is not fast enough to warrant high efficiency for short pulse applications. By separating the Ho and the Tm ions and doping the Tm in YALO3 and the Ho in YLF, we were able to directly pump the Ho I7 man...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Optics Express
سال: 2019
ISSN: 1094-4087
DOI: 10.1364/oe.27.018273