Response of 2D SiC/SiC Composites Resistivity to Service Environments
نویسندگان
چکیده
منابع مشابه
The Resistivity of Carbon Fibers /abs Resin Composites
Polymers filled with conductive particles and fibers have been widely used in electromagnetic interference (EMI) shielding, electrical static discharge (ESD), and other regions. In these combinations, the carbon fibers filled polymer composites are special interest due to their excellent mechanical properties and high conductivity as well as good durability to environmental conditions. However,...
متن کاملResistivity of dilute 2D electrons in an undoped GaAs heterostructure.
We report resistivity measurements from 0.03 to 10 K in a dilute high mobility 2D electron system. Using an undoped GaAs/AlGaAs heterojunction in a gated field-effect transistor geometry, a wide range of densities, 0.16 x 10(10) to 7.5 x 10(10) cm(-2), are explored. For high densities, the results are quantitatively shown to be due to scattering by acoustic phonons and impurities. In an interme...
متن کاملFast computation of optimized electrode arrays for 2D resistivity surveys
Four different methods to automatically select an optimal set of array configurations that gives the maximum resolution of the subsurface with a limited number of measurements for 2D electrical imaging surveys were tested. The first method (CR method) directly calculates the change in the model resolution for each new array added to the base data set, and uses this to select array configuration...
متن کاملDetection of sinkholes using 2D electrical resistivity imaging
Sinkholes in dolomitic areas are notoriously difficult geophysical targets, and selecting an appropriate geophysical solution is not straightforward. Electrical resistivity imaging, or tomography (RESTOM) is well suited to mapping sinkholes because of the ability of the technique for detecting resistive features and discriminating subtle resistivity variations. RESTOM surveys were conducted at ...
متن کاملResistivity, Thermoelectric Power and Magnetoelectric Effect in Ni0.7Co0.3Fe2O4 + Ba0.7Pb0.3TiO3 Composites
(y)Ni0.7Co0.3Fe2O4 + (1-y) Ba0.7Pb0.3TiO3 composites were prepared using ceramic method. The phase analysis was carried out by X-ray diffraction technique. It has confirmed that no impurity phase is present in the composites. The dc resistivity, thermo emf studied as a function of temperature. The value of static magnetoelectric conversion factor, i.e. dc (ME)H studied as a function of magnetic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Inorganic Materials
سال: 2021
ISSN: 1000-324X
DOI: 10.15541/jim20210138