Response of Natural Sisal Reinforced Polyester Composites to Three-point and Four-point Bending
نویسندگان
چکیده
منابع مشابه
Effect of inter-laminar fibre orientation on the tensile properties of sisal fibre reinforced polyester composites
In this present work, effects of interlamina fibre orientation on the tensile properties of composites were studied and the results were discussed. The varying types of fibre oriented composites were prepared using the compression moulding technique at a pressure of 17 MPa. The different types of oriented composites investigated were 90o/0 o /90 o, 0 o /90 o /0 o, 90 o /0 o /0 o /90 o, 0 o /45 ...
متن کاملMechanical Properties of Short Banana/Sisal Hybrid Fibre Reinforced Polyester Composites
Short randomly oriented banana and sisal hybrid fibre reinforced polyester composites, banana/polyester composites and sisal/polyester composites were fabricated at different fibre loading say, 0.20 to 0.50 Vf. Composites were prepared by varying the relative volume fraction of the two fibres at each fibre loading. When the fibre loading was increased; tensile, flexural and impact properties in...
متن کاملExperimental investigation of static and fatigue behaviour of composites honeycomb materials using four point bending tests
In this study static and fatigue behaviours of honeycomb sandwich composites, made of aramide fibres and aluminium cores, are investigated through four-point bending tests. Damage and failure modes are reported and discussed. Global and local parameters were considered to evaluate the fatigue life of the analysed sandwich composites. Effects of core densities and the cell orientation (L or W) o...
متن کاملExploration of the Customized Fixtures for the Evaluation of Three-point Bending Strength of Dental Resin Composites
Introduction: This study aimed to devise customized fixtures for the evaluation of three-point bending strength (TPBS) of resin-based dental composites (RBCs). Materials and Methods: A cube-shaped jig made out of wood with dimensions of 105×105×101 mm was prepared in this study. A 20-mm-diameter hole was made in the center of the wooden jig. In addition, a stai...
متن کاملStatistical Behaviour of Hemp and Sisal Fiber Reinforced Polypropylene Composites
The use of vegetal fibres in thermoplastic matrix is increasing mainly because of their opportunity to recycle the structures. An another advantage is to provide materials for developing countries were these fibers are abundant. Nowadays, a lot of studies are more focused on the fibers to understand their microstructure and to establish their mechanical properties [1,2]. One of the main results...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Procedia Manufacturing
سال: 2017
ISSN: 2351-9789
DOI: 10.1016/j.promfg.2016.12.080