Revealing anelasticity and structural rearrangements in nanoscale metallic glass films using in situ TEM diffraction
نویسندگان
چکیده
منابع مشابه
Revealing anelasticity and structural rearrangements in nanoscale metallic glass films using in situ TEM diffraction
We used a novel diffraction-based method to extract the local, atomic-level elastic strain in nanoscale amorphous TiAl films during in situ transmission electron microscopy deformation, while simultaneously measuring the macroscopic strain. The complementary strain measurements revealed significant anelastic deformation, which was independently confirmed by strain rate experiments. Furthermore,...
متن کاملNanoscale structure and structural relaxation in Zr50Cu45Al5 bulk metallic glass.
Hybrid reverse Monte Carlo simulations of the structure of Zr50Cu45Al5 bulk metallic glass incorporating medium-range structure from fluctuation electron microscopy data and short-range structure from an embedded atom potential produce structures with significant fractions of icosahedral- and crystal-like atomic clusters. Similar clusters group together into nanometer-scale regions, and relaxat...
متن کاملMechanisms of failure in nanoscale metallic glass.
The emergence of size-dependent mechanical strength in nanosized materials is now well-established, but no fundamental understanding of fracture toughness or flaw sensitivity in nanostructures exists. We report the fabrication and in situ fracture testing of ∼70 nm diameter Ni-P metallic glass samples with a structural flaw. Failure occurs at the structural flaw in all cases, and the failure st...
متن کاملCorrection: Quantitative in situ TEM tensile fatigue testing on nanocrystalline metallic ultrathin films.
The authors have found an error in the post-processing scheme to calculate the stress–strain curves from the raw electrical data (ΔC1 − ΔC2 vs. Vin, with and without the specimen). The scheme consists of calculating X A (using eqn (6)), from which ΔC1 is known (using eqn (1)). ΔC2 is then determined knowing the measured ΔC1 − ΔC2 value, from which XLS can be determined using eqn (1). The calibr...
متن کاملQuantitative in situ TEM tensile fatigue testing on nanocrystalline metallic ultrathin films.
A unique technique to perform quantitative in situ transmission electron microscopy (TEM) fatigue testing on ultrathin films and nanomaterials is demonstrated. The technique relies on a microelectromechanical system (MEMS) device to actuate a nanospecimen and measure its mechanical response. Compared to previously demonstrated MEMS-based in situ TEM techniques, the technique takes advantage of ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Materials Research Letters
سال: 2016
ISSN: 2166-3831
DOI: 10.1080/21663831.2016.1228709