Revealing load hysteresis based on physical-mesomechanical deformation and fracture criteria
نویسندگان
چکیده
منابع مشابه
Chopper-Based Real-Time Load Emulator with Feed-Forward and Hysteresis Current Controller
Nowadays, the usage of load emulators, is the best method for implementation and analysis of different electrical load change scenarios in laboratories. This paper presents an improved programmable load emulator which can emulate both reference active and reactive power simultaneously. The proposed control system can track the dynamic load changes rapidly and accurately in addition to pulse cha...
متن کاملNonlinear Dynamics of Hysteresis-Based Load Controls
Direct load control can be achieved by varying the hysteresis band of switchable loads, thereby changing their on/off durations. Such hysteresis-based control methods may, however, display complex dynamics that must be thoroughly understood in order to design safe control mechanisms. This paper explores the dynamical behavior of a group of hysteresis-based PEV chargers. Of interest is the chang...
متن کاملFracture and Deformation
The high-velocity impact resistance of hot-pressed zirconum diboride with 30 volume percent silicon carbide was studied using a combined experimental and computational approach. Test specimens in the form of 2 mm thick polished disks were impacted with -0.8 mm diameter tungsten carbide spheres at velocities up to 320 d s . The intrinsic flexure strength of the specimens was -1000 MPa. The flexu...
متن کاملProbability-Based Load Criteria for Structural Design
Structural codes and standards provide the foundation of good engineering practice and a framework for addressing safety and serviceability issues in structural design. They identify natural and man-made forces that must be considered, define magnitudes of these forces for design, and prescribe methods for determining structural resistance to these forces. The framers of these documents on whic...
متن کاملInteractive Simulation of Physically-Based Deformation, Plasticity, and Fracture
We consider the problem of real-time interactive simulation of deformation, plasticity and fracture. This document compares, contrasts, and synthesizes two recent directions in the field (covered in four papers). Both directions improve upon a linear elastic model for simulating deformations and use the finite element method (FEM), but approach the problem of handling large rotational deformati...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Physical Mesomechanics
سال: 2010
ISSN: 1029-9599
DOI: 10.1016/j.physme.2010.11.014