Reverse rigid body motion in multi-stage single point incremental forming

نویسندگان

چکیده

Abstract. This paper provides an analysis of the Rigid Body Motion (RBM) in multi-stage Single Point Incremental Forming a cylindrical cup. The RBM is studied using Digital Image Correlation to track material each contour tool, resulting better understanding phenomenon than has been shown literature. study shows that highest Z-translations midpoint cone take place last contours stage, where these peaks also increase per stage. An interesting observation reverse rigid body motion, appearing close end right before sudden drop bottom contours. causes flattening and results smaller stage for later forming stages. Additionally, stepover between two intermediate stages have important effect on stepped features bottom, but did not significant accuracy cone.

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

The Effects of Forming Parameters on the Single Point Incremental Forming of 1050 Aluminum Alloy Sheet

The single point incremental forming (SPIF) is one of the dieless forming processes which is widely used in the sheet metal forming. The correct selection of the SPIF parameters influences the formability and quality of the product. In the present study, the Gurson-Tvergaard Needleman (GTN) damage model was used for the fracture prediction in the numerical simulation of the SPIF process of alum...

متن کامل

Predicting Force in Single Point Incremental Forming by Using Artificial Neural Network

In this study, an artificial neural network was used to predict the minimum force required to single point incremental forming (SPIF) of thin sheets of Aluminium AA3003-O and calamine brass Cu67Zn33 alloy. Accordingly, the parameters for processing, i.e., step depth, the feed rate of the tool, spindle speed, wall angle, thickness of metal sheets and type of material were selected as input and t...

متن کامل

Single Point Incremental Forming of Polymers

The aim of the present paper is to evaluate the possibility of producing low-cost, small-batch, polymer sheet components by means of single point incremental forming (SPIF) at room temperature. During the research work, five different thermoplastic materials were incrementally formed into cones with an increasing wall angle on a conventional CNC milling machine. In designed experiments, signifi...

متن کامل

Investigation of Fracture Depth of Al/Cu Bimetallic Sheet in Single Point Incremental Forming Process

Single point incremental sheet forming (SPISF) has demonstrated significant potential to form complex sheet metal parts without using component-specific tools and is suitable for fabricating low-volume functional sheet metal parts economically. In the SPIF process, a ball nose tool moves along a predefined tool path to form the sheet. This work aims to optimize the formability and forming force...

متن کامل

Single Point Micro Incremental Forming of Miniature Shell Structures

This paper describes single point micro incremental forming (SPMIF) applied to the fabrication of meso-scale shell structures. The authors have developed SPMIF without using any die and backing plate for flexible micro forming of miniature 3D products in a range of micro meters to sub-millimeters. A desk-top type of CNC milling machine was constructed as an experimental apparatus. Thin aluminum...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Materials research proceedings

سال: 2023

ISSN: ['2474-3941', '2474-395X']

DOI: https://doi.org/10.21741/9781644902417-11