Review: Closed-Cell Metallic Foams Produced via Powder Metallurgy
نویسندگان
چکیده
The production of closed-cell metallic foams has been interest to the scientific community and industry for decades, owing their unique properties, which include high specific strength stiffness, buoyancy, shock absorption, crash worthiness. One approaches fabrication relies solely on use powders is manifested in what referred as powder metallurgy (PM) route. This review discusses underlying fundamentals process, recent developments together with our current understanding. effect process parameters developed foam structure reviewed a range metals, alloys, metal matrix composites. Fundamental foaming mechanisms characteristics are discussed.
منابع مشابه
Porous, Superelastic NiTi Produced by Powder-Metallurgy
Near-stoichiometric NiTi was foamed in the solid state at elevated temperatures through creep expansion of highpressure argon pores previously entrapped during powder consolidation. A sample with 17% porosity was found to be superelastic up to a compressive stress of 800 MPa.
متن کاملHigh Porosity Metallic Glass Foam: A Powder Metallurgy Route
A powder metallurgy route to the fabrication of metallic glass foam is introduced. The method involves consolidating metallic glass powder blended with blowing agent particulates to produce expandable precursors, capable of yielding foams with porosities as high as 86%. The foams are found to inherit the strength of the parent metallic glass, and to be able to deform heavily toward full densifi...
متن کاملPorous Titanium Scaffolds Produced by Powder Metallurgy for Biomedical Applications
Department of Bioscience and Buccal Diagnosis, São Jose dos Campos School of Dentistry, State University of São Paulo – UNESP, Av. Engenheiro Francisco José Longo, 777, 12245-000 São José dos Campos SP, Brazil National Institute of Technology, Av. Venezuela, 200, Centro, Rio de Janeiro RJ, Brazil Department of Materials, Air and Space Institute, CTA, Praça Mal. do Ar Eduardo Gomes, 14, 12904-00...
متن کاملToz Metalurji̇si̇ Yöntemi̇ İle Alümi̇nyum Köpük Üreti̇mi̇ Procuction of Al Foams by Powder Metallurgy Route
In this study pure Al and pre-alloyed Al alloy powders (Alumix 231Al-Cu %2.5-Mg %0.5–Si %14) with or without reinforcing elements were used to produce classical Al foam or spherical Al foam with various production parameters by using powder metallurgy route and the results obtained have been discussed. Al2O3 and SiC particles were used as reinforcing elements and TiH2 powders were used as foami...
متن کاملProduction and microstructural investigation of Al-nano TiB2 composite produced by powder metallurgy technique
Automotive and aerospace industries are required to light materials which have high properties. This causes to reduce production cost and fuel consumption. One of these advanced materials that have been attracted at these decades is particulate metal matrix nanocomposites. These materials have a combination of ductile matrix alloy properties and ceramic reinforcement nanoparticles. Powder metal...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Metals
سال: 2023
ISSN: ['2075-4701']
DOI: https://doi.org/10.3390/met13050959