Review of Experimental Study on Melt Pool Flow Dynamics during Laser Material Processing
نویسندگان
چکیده
منابع مشابه
Study and Modelling of the Melt Pool Dynamics during Selective Laser Sintering and Melting
Selective Laser Sintering (SLS) and Selective Laser Melting (SLM) are parent layer manufacturing processes that allow generating complex 3D parts by consolidating layers of powder material on top of each other. Consolidation is obtained by processing the selected areas using the thermal energy supplied by a focused laser beam. In SLS partial fusion of powder particles takes place, followed by a...
متن کاملGrafting of Acrylamide to Low Density Polyethylene During Melt Processing
Acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. Effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. FTIR studies revealed that the degree of grafting increased by an increase in acrylamide concentration. Maximum grafting was obtained at 7 mi...
متن کاملOnline Melt Pool Temperature Control for Laser Metal Deposition Processes
Melt pool temperature is of great importance to deposition quality in Laser Metal Deposition processes. To control the melt pool temperature, an empirical process model describing the relationship between the temperature and process parameters (i.e., laser power, powder flow rate, and traverse speed) is established and verified experimentally. A general tracking controller using the Internal Mo...
متن کاملExperimental Study of the Laser Induced Flow and Thermophoresis of Suspending Microparticles
The induced flow effect is the rotary motion generated in the fluid flow due to the temperature gradient. The phenomenon of thermophoresis is the movement of particles from the warmer side of the fluid to the cooler side. Laser is a very suitable device for creating a temperature gradient due to its unique features such as high power density, harmonic waves, single wavelength and very low diver...
متن کاملgrafting of acrylamide to low density polyethylene during melt processing
acrylamide was grafted in low density polyethylene during melt processing in the presence of a free radical initiator using a torque rheometer in a closed system. effects of processing time, acrylamide and benzoyl peroxide concentrations were studied. ftir studies revealed that the degree of grafting increased by an increase in acrylamide concentration. maximum grafting was obtained at 7 minute...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Jixie gongcheng xuebao
سال: 2023
ISSN: ['0577-6686']
DOI: https://doi.org/10.3901/jme.2023.05.291