Review of technologies for oil and gas produced water treatment
نویسندگان
چکیده
منابع مشابه
simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
Investigating the Treatment of Oil and Gas Produced Water Using a Spray Dryer on a Bench Scale
The current work investigates the performance of a single-stage, bench-scale system using a spray dryer to treat produced water. The produced water is generated in three large reservoirs of Ahvaz, Maroon, and Mansouri fields, which have different compositions but the same high total dissolved solids (TDS) and total organic carbon (TOC). The results of this study indicate that the newly develope...
متن کاملcomparison of zoe and vitapex for canal treatment of necrotic primary teeth
چکیده ندارد.
15 صفحه اولGas-oil Ratio and Water-oil Ratio
An indicator of bypassing is a premature drop in gas-oil ratio; i.e., earlier than expected collapse of gas saturation. Early gas collapse (water fillup) may indicate that channeling has occurred. In layered reservoirs with no or little vertical crossflow, water injection in an initially depressurized layer will cause GOR to drop rapidly. Often naturally fractured reservoirs exhibit fast gas co...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Hazardous Materials
سال: 2009
ISSN: 0304-3894
DOI: 10.1016/j.jhazmat.2009.05.044