Rivulet deflection in the heated liquid film with different initial characteristics
نویسندگان
چکیده
Abstract Analysis of rivulet movement across flow direction in vertical flowing heated liquid film at different Reynolds numbers and initial temperatures was carried out. It is shown, that amplitude deflection increases substantially heat fluxes corresponding to the appearance thermocapillary structures type A.
منابع مشابه
Explosion of a liquid film in contact with a pulse-heated solid surface detected by the probe-beam deflection method.
The threshold for explosive vaporization of a liquid layer on an opaque solid surface heated by an ultraviolet excimer pulsed laser is studied by a photoacoustic probe-beam deflection method. The probe beam traverses the liquid in the vicinity of the laser-heated liquid-solid interface. Below the explosion threshold, photoacoustic generation in the solid occurs only through a thermoelastic mech...
متن کاملNumerical Analysis of Grease Film Characteristics in Tapered Roller Bearing Subject to Shaft Deflection
The shaft deflection is one of critical factors that deteriorate the grease lubrication state inside the tapered roller bearings (TRBs). So, in this paper, on the premise of the TRB subjected to the combined loads and the shaft is deflected, the grease lubrication model at the TRB contacts was constructed, in which the interaction loads, linear and angular displacements of the bearing parts wer...
متن کاملLoad Deflection Characteristics of Nickel Titanium Initial Archwires.
OBJECTIVES The aim of this study was to assess and compare the characteristics of commonly used initial archwires by their load deflection graphs. MATERIALS AND METHODS This study tested three wire designs namely copper nickel titanium (CNT), nickel titanium (NiTi), and multi-strand NiTi (MSNT) archwires engaged in passive self-ligating (PSL) brackets, active self-ligating (ASL) brackets or c...
متن کاملInstabilities of Thin Viscous Liquid Film Flowing down a Uniformly Heated Inclined Plane
Instabilities of a thin viscous film flowing down a uniformly heated plane are investigated in this study. The heating generates a surface tension gradient that induces thermocapillary stresses on the free surface. Thus, the film is not only influenced by gravity and mean surface tension but also the thermocapillary force is acting on the free surface. Moreover, the heat transfer at the free su...
متن کاملload deflection characteristics of nickel titanium initial archwires
objectives: the aim of this study was to assess and compare the characteristics of commonly used initial archwires by their load deflection graphs. materials and methods : this study tested three wire designs namely copper nickel titanium (cnt), nickel titanium (niti), and multi-strand niti (msnt) archwires engaged in passive self-ligating (psl) brackets, active self-ligating (asl) brackets or ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of physics
سال: 2021
ISSN: ['0022-3700', '1747-3721', '0368-3508', '1747-3713']
DOI: https://doi.org/10.1088/1742-6596/2119/1/012071