Robotic Deep Penetration K-TIG Welding System Based on Weld Penetration Detection

نویسندگان
چکیده

برای دانلود باید عضویت طلایی داشته باشید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Effect of welding parameters on penetration depth in FB-TIG welding of 5083 aluminum alloy

In the present study, effect of current, welding speed and preheat temperature during FB-TIG welding of AA5083 aluminum alloy was studied. Using the Taguchi method, 9 different tests were designed to investigate the effect of welding parameters on the penetration depth. Consistent with predictions, increasing the current and preheat temperature, and reducing the welding speed led to an increase...

متن کامل

Effect of welding parameters on penetration depth in FB-TIG welding of 5083 aluminum alloy

In the present study, effect of current, welding speed and preheat temperature during FB-TIG welding of AA5083 aluminum alloy was studied. Using the Taguchi method, 9 different tests were designed to investigate the effect of welding parameters on the penetration depth. Consistent with predictions, increasing the current and preheat temperature, and reducing the welding speed led to an increase...

متن کامل

Double-sided Arc Welding Increases Weld Joint Penetration

Welding time and joint preparation are among the most important factors dominating the cost and productivity of welding. If the desired penetration of the weld pool can be achieved in a single pass, the welding speed will be the major factor that determines the welding time. When the thickness of the part increases, grooves may have to be machined so that the desired penetration may still be ob...

متن کامل

Vision-based neuro-fuzzy control of weld penetration in gas tungsten arc welding of thin sheets

This paper develops a vision-based neuro-fuzzy system to control the weld joint penetration in Gas Tungsten Arc Welding (GTAW) of thin sheets. To this end, a camera equipped with a specially designed composite light-filter is used to observe the weld pool from the topside of the workpiece so that comparatively distinct images of the weld pool are obtained. As the Backside weld Width (BW) reflec...

متن کامل

Keyhole Double-sided Arc Welding Process for Deep Narrow Penetration

In regular arc welding, the arc heat is transferred from the surface of the workpiece to melt it. In keyhole plasma arc welding, the workpiece is melted by the plasma jet which heats the wall of the keyhole along the thickness direction. Penetration is achieved with reduced heat input. However, the plasma jet only gains its energy in the arc before reaching the keyhole. In the keyhole where no ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

ژورنال

عنوان ژورنال: Journal of Mechanical Engineering

سال: 2019

ISSN: 0577-6686

DOI: 10.3901/jme.2019.17.014