Role of Ambient Pressure on Splat Formation and Coating Adhesion Strength during Thermal Spraying Process
نویسندگان
چکیده
منابع مشابه
Splat Formation Mechanism in Thermal Spraying*
In order to understand the splat formation process of individual splat deposited by thermal spraying, commercially available Nickel powders with diameter of several tens micrometers were thermally sprayed onto mirror polished AISI304 substrate surface. The deposited splat shows transition phenomenon from splash type to disk one in flattening on collision onto substrate surface according to both...
متن کاملModeling of splat particle splashing data during thermal spraying with the Burr distribution
Splashing of splat particles is one of the most important phenomena in industrial processes such as thermal spray coating. The data relative to the degree of splashing of splats sprayed with a normal angle are commonly characterized by the Weibull distribution function. In this present study, an effort has been made to show that the Burr distribution is better than the Weibull distribution for ...
متن کاملconsequence analysis of the leakage, ignition and explosion during high pressure sour gas injection process to the oil reservoir
there is no doubt that human being needs to become integrated with industry and industry needs to be progressed, daily. on the other hand, serious events in industrial units specially in oil industries has been shown that such damages and events are industry related ones. the consequence of such events and damages which resulted in chemical and poisoned explosions and loss of life and property ...
In situ Particle Generation and Splat Formation During Solution Precursor Plasma Spraying of YttriaStabilized Zirconia Coatings
Thermal barrier coatings (TBCs) based on Yttria-stabilized Zirconia (YSZ) deposited by the solution precursor plasma spray (SPPS) technique have been claimed to exhibit superior durability compared to conventional plasma spraying and even electron-beam physical vapor deposition. This has been attributed to the interesting features, like vertical cracks, nanosized pores, and fine splats that are...
متن کاملsimulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water
abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...
ذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2011
ISSN: 0288-4771
DOI: 10.2207/qjjws.29.151s