Rolling of 12% Aluminium Iron Alloy, Rolling Process Decided by Design of Experiment
نویسندگان
چکیده
منابع مشابه
Experimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
Equal channel angular rolling (ECAR) process is one of the methods that have been used to make ultra-fine materials by imposing severe plastic deformation. After repeating the process several times, a large effective strain is applied to the sample that can cause decreasing the grain size and improving the mechanical and physical properties of the metal. In this study, thermal conductivity of t...
متن کاملExperimental Investigation of Thermal Conductivity of Aluminum Alloy 3003 Produced by Equal Channel Angular Rolling Process
Equal channel angular rolling (ECAR) process is one of the methods that have been used to make ultra-fine materials by imposing severe plastic deformation. After repeating the process several times, a large effective strain is applied to the sample that can cause decreasing the grain size and improving the mechanical and physical properties of the metal. In this study, thermal conductivity of t...
متن کاملThe Effect of Cross-Rolling Process on Nanostructure of Al 1050 Alloy
The cross-rolling is a new process that results in significant evolutions in microstructure of the metallic sheets. In this study, an aluminium 1050 sheet was rolled up to 95% reduction in cross directions for ten passes. The rolled samples were investigated by X-ray diffraction (XRD) and transmission electron microscopy (TEM). The rolled samples possess a high dislocation density and ultra-fin...
متن کاملexperimental investigation of thermal conductivity of aluminum alloy 3003 produced by equal channel angular rolling process
equal channel angular rolling (ecar) process is one of the methods that have been used to makeultra-fine materials by imposing severe plastic deformation. after repeating the process severaltimes, a large effective strain is applied to the sample that can cause decreasing the grain size andimproving the mechanical and physical properties of the metal. in this study, thermal conductivityof the s...
متن کاملAnalytical Modified Model of Cold Rolling Process and Investigation of the Effect of Work Roll Flattening on the Rolling Force
Cold rolling of steel is one of the most important metal forming processes so an accurate control of its parameters during the process is necessary. In this paper, the friction coefficient has been proposed as a function of cold rolling parameters such as forward slip, forward and backward tensile stresses ,strip thickness, static deformation, resistance of strip before and after rolling ,strip...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1963
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.27.6_271