Rolling Wear Properties of Ion Nitrided Steels
نویسندگان
چکیده
منابع مشابه
The Effect to Epsilon Phase on the Friction and Wear of Nitrided Die Steels (RESEARCH NOTE)
In this paper, the wear resistance and antifriction of epsilon phase layer and diffusion layer of gas nitrided D2 steel and M2 steel have been studied. The changes m wear mechanism of epsilon phase under the load from 20N to 200N are analysed. When the load is lighter than 100N, it is mainly oxidizing wear on friction surface. The adhesion, peeling off and abrasive wear appear on friction surfa...
متن کاملThe Mechanical Properties of Plasma Nitrided Layers
The article deals with mechanical properties of layers which were created by plasma nitriding technology. Nitrided layers apply to steel AISI 4140 were evaluated by metallographic method, GDOES method, microanalysis method and microhardness method. The trend of mechanical properties was experimentally obtained in dependence on length of cavity during plasma nitriding process. Moreover, the infl...
متن کاملElectrostatic wear monitoring of rolling element bearings
Research and development work at the University of Southampton using an electrostatic condition monitoring system developed by Smiths Aerospace Information Systems has shown that electrostatic charge signals can be used to detect the onset of wear in lubricated tribo-contacts. Preliminary investigations have already demonstrated the viability of this system when tested on a laboratory-based pin...
متن کاملFrom micro to nano scales -recent progress in the characterization of nitrided austenitic stainless steels
In the frontier of materials science, understanding of materials has been in multiple scales from macro, micro, to atomic levels. This is attributed to the advanced instrumentations such as SEM, TEM, XPS, XRD, as well as several other spectroscopic and metallographic analyses. Fe-CrNi based austenitic stainless steels have a diverse range of modern applications ranging from biomedical prosthese...
متن کاملStudy on Oxidation of Stainless Steels During Hot Rolling
The oxidation of stainless steels 304 and 304L during hot rolling is studied in this paper. Results show the oxide scale thickness decreases significantly with an increase of reduction, and the oxide scales of both 304 and 304L stainless steels were found more deformable than the steel substrate. Surface roughness shows a complicated transfer during the hot rolling process due to the complexity...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of the Japan Institute of Metals and Materials
سال: 1977
ISSN: 0021-4876,1880-6880
DOI: 10.2320/jinstmet1952.41.3_225