Rotating Stall Induced Non-Synchronous Blade Vibration Analysis for an Unshrouded Industrial Centrifugal Compressor
نویسندگان
چکیده
منابع مشابه
Simulation of Non-synchronous Blade Vibration of an Axial Compressor Using a Fully Coupled Fluid/strcuture Interaction
In this paper non-synchronous vibration (NSV) of a GE axial compressor is simulated using a fully coupled fluid/strcuture interaction (FSI). Time accurate NavierStokes equations are solved with a system of 5 decoupled structure modal equations in a fully coupled manner. A 3rd order WENO scheme for the inviscid flux and a 2nd order central differencing for the viscous terms are used to resolve n...
متن کاملInfluence of Vaned Diffuser on Dangerous Blade Vibration Due to Blade Flow Interactions in a Centrifugal Compressor
Influence of diffuser vane position on dangerous blade vibration due to blade flow interactions at part load operating condition was investigated in a centrifugal compressor. By means of some measurement and analysis techniques a mechanism of interaction between blade vibration and circumferential flow condition in the impeller with vaned diffuser was determined, which is a cause of dangerous b...
متن کاملNumerical Investigation of Rotating-Stall in a Stage of an Axial Compressor with Two Different Approaches
An unsteady two-dimensional finite-volume solver was developed based on Van Leer’s flux splitting algorithm in conjunction with “Monotonic Upstream Scheme for Conservation Laws (MUSCL)” limiters and the two-layer Baldwin-Lomax turbulence model was also implemented. To validate the solver, two test cases were prepared and the computed results had good agreements with reference data. The rotating...
متن کاملComputational Study of Rotating Stall in High-Speed Compressor
A computational study of compressor instability based on body force representation of each blade-row of a transonic stage has been implemented for both clean inlet flow and flow with circumferential total pressure inlet distortion. The computational results indicate that many aspects related to compressor instability differ from what was observed in the experiment: steady compressor characteris...
متن کاملNumerical Simulation of Dynamic Stall Phenomena in Axial Flow Compressor Blade Rows
This article explores the simulation of stall phenomena in axial compressor blade rows. The approach is based on the numerical solution of the compressible, two-dimensional Navier-Stokes equations. The results of both unforced and forced low-speed rotor stall are presented. In unforced cases, substantial ow separation is observed before the maximum pressure rise operating point is reached. Thes...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Sensors
سال: 2019
ISSN: 1424-8220
DOI: 10.3390/s19224995