ROTATIONAL STIFFNESS AND BENDING STRENGTH OF STEEL CONNECTIONS IN TIMBER LATTICE SHELL
نویسندگان
چکیده
منابع مشابه
Effects of Reinforcement Geometry on Strength and Stiffness in Adhesively Bonded Steel-Timber Flexural Beams
A finite element model is developed to analyse, as a function of volume fraction, the effects of reinforcement geometry and arrangement within a timber beam. The model is directly validated against experimental equivalents and found to never be mismatched by more than 8% in respect to yield strength predictions. Yield strength increases linearly as a function of increasing reinforcement volume ...
متن کاملRotational Stiffness at Ridges of Timber Folded-plate Structures
Folded-plate structures provide an efficient design using thin laminated veneer lumber panels. Inspired by Japanese furniture joinery, the multiple tab-and-slot joint was developed for the multi-assembly of timber panels with non-parallel edges without adhesive or metal joints. Because the global analysis of our origami structures reveals that the rotational stiffness at ridges affects the glob...
متن کاملLog Quality and the Strength and Stiffness of Structural Timber
A sample of 78 Pinus radiata D. Don logs was measured and sawn to maximise yields of 100 x 50-mm and 200 x 50-mm timber. The average bending strength and stiffness of the timber were found to depend on the basic density of the log but the lower fifth-percentile strength was more dependent on branch index. For the 28-year-old stand sampled, logs with a low branch index yielded 100 x 50-mm timber...
متن کاملLoad-carrying behaviour of steel-to-timber dowel connections
This paper details tests on steel-wood-steel connections with thin dowels carried out at the University of British Columbia in Vancouver, Canada. Connections configurations were selected in such a way that the influence of the main parameters such as dowel slenderness ratio, dowel strength, fastener spacing and end distance and the number of dowels could be studied. An important issue of the pa...
متن کاملSystem Effects Influencing the Bending Strength of Timber Beams
A stochastic model of hierarchical series system type for the bending strength of spruce beams is defined from the anticipation that the bending failure takes place at a cross-section with a defect cluster formed by knots or grain irregularities. The parameters of the model are estimated from measurements of the strengths of a large number of short test pieces cut from the beams such that judge...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of Structural and Construction Engineering (Transactions of AIJ)
سال: 2018
ISSN: 1340-4202,1881-8153
DOI: 10.3130/aijs.83.577