Rotorcraft vibration control: adaptive vs LPV methods
نویسندگان
چکیده
منابع مشابه
L1 Adaptive Control for Autonomous Rotorcraft
In this paper, the L1 adaptive control theory is used to design a high bandwidth inner loop controller to provide attitude and velocity stabilization of an autonomous small-scale rotorcraft in the presence of wind disturbances. The nonlinear model of the vehicle is expressed as a linear time-varying system for a predefined region of operation, for which an L1 adaptive controller is designed. Th...
متن کاملAdaptive Designs in Vibration Control
This paper aims to introduce two new adaptive designs of vibration control systems. First is an absorber and the second is an isolator. Absorbers are used for suppressing unwanted vibrations, while isolators isolating them. Structural parameter changes and excitation directions significantly affect the behavior of the conventional passive controllers. A Tuned Stiffness Damper (TSD), stepper mot...
متن کاملLPV design of adaptive integrated control for road vehicles ?
The paper presents a multi-layer supervisory architecture for the design of adaptive integrated control systems in road vehicles. The performance specifications are guaranteed by the local LPV (Linear Parameter Varying) controllers, while the coordination of these components is provided by the supervisor. Monitoring components provide the supervisor with information needed to make decisions abo...
متن کاملAdaptive Piezoelectric Absorber for Active Vibration Control
Abstract: Passive vibration control solutions are often limited to working reliably at one design point. Especially applied to lightweight structures, which tend to have unwanted vibration, active vibration control approaches can outperform passive solutions. To generate dynamic forces in a narrow frequency band, passive single-degree-of-freedom oscillators are frequently used as vibration abso...
متن کاملRotorcraft Vibration and Noise Prediction Using a Unified Aeroelastic Analysis
A study of the combined helicopter noise and vibration problem was conducted. A refined aerodynamic model capable of calculating the unsteady surface pressure distribution on rotor blade/flap combinations is developed and coupled with an aeroelastic analysis simulation code. An acoustic prediction tool based on WOPWOP is combined with the aeroelastic analysis based on a flexible blade with coup...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: IFAC-PapersOnLine
سال: 2015
ISSN: 2405-8963
DOI: 10.1016/j.ifacol.2015.11.122