Roughing of Thick, Coarse-grained High-temperature-processing Steels Processed via Compact Strip Production
نویسندگان
چکیده
منابع مشابه
Austenite Stability during Nanoindentation of Ultrafine and Coarse Grained AISI 304L Stainless Steels
In the present study, the effect of grain size on the austenite stability was studied by nanoindentation tests in a 304L stainless steel. Thermomechanical processing based on cold rolling and annealing was used to produce two different types of austenite: ultrafine grained (UFG) austenite with the average grain size of 0.65 μm and coarse grained (CG) austenite with the average grain size of 12 ...
متن کاملHigh Temperature Behavior of Dual Phase Steels
Dual phase steels with different martensite volume fraction and morphology were tensile tested at a temperature range of 25 to 5500C. Stress-strain curves of all steels showed serration flow at temperatures of 250 and 3500C, and smooth flow at the other temperatures. Both yield and ultimate tensile strengths increased with increasing testing temperature up to about 450<sup...
متن کاملHigh-Resolution Coarse-Grained Modeling Using Oriented Coarse-Grained Sites.
We introduce a method to bring nearly atomistic resolution to coarse-grained models, and we apply the method to proteins. Using a small number of coarse-grained sites (about one per eight atoms) but assigning an independent three-dimensional orientation to each site, we preferentially integrate out stiff degrees of freedom (bond lengths and angles, as well as dihedral angles in rings) that are ...
متن کاملaustenite stability during nanoindentation of ultrafine and coarse grained aisi 304l stainless steels
in the present study, the effect of grain size on the austenite stability was studied by nanoindentationtests in a 304l stainless steel. thermomechanical processing based on cold rolling and annealing wasused to produce two different types of austenite: ultrafine grained (ufg) austenite with the averagegrain size of 0.65 μm and coarse grained (cg) austenite with the average grain size of 12 μm....
متن کاملProving linearisability via coarse-grained abstraction
Linearisability has become the standard safety criterion for concurrent data structures ensuring that the effect of a concrete operation takes place after the execution some atomic statement (often referred to as the linearisation point). Identification of linearisation points is a non-trivial task and it is even possible for an operation to be linearised by the execution of other concurrent op...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ISIJ International
سال: 2017
ISSN: 0915-1559,1347-5460
DOI: 10.2355/isijinternational.isijint-2017-105