Route Effects in I-ECAP of AZ31B Magnesium Alloy
نویسندگان
چکیده
منابع مشابه
Constitutive Modelling of AZ31B-O Magnesium Alloy for Cryogenic Machining
The success of a FE model for metal cutting process is strongly dependent on the accurate characterization of the workpiece material, under similar conditions as those found in metal cutting. In this paper, dynamic shear tests using a Gleeble machine have been performed on 4 mm thickness disks of AZ31B-O magnesium alloy, using a special designed tool. In order to include the effects of the cryo...
متن کاملPrediction of corrosion rate of AZ31B magnesium alloy under salt fog environment in NaCl solution
Magnesium alloys have gained considerable interest as a material for automotive and aerospace applications due to its low density, high specific strength, and good castability. However, another considerable issue is their corrosion properties. This restricts their practical applications. In this present research, corrosion behavior of the AZ31B magnesium alloy was evaluated by conducting salt f...
متن کاملOptimizing the Process Parameters of Friction Stir Welded Joint of Magnesium Alloy Az31b
This paper deals with Friction stir welding of AZ31B Mg alloy by using H13 Tool at different rotational speeds and welding speeds .Experiments were conducted according to L4 Orthogonal array which was suggested by Taguchi. Optimum parameters for optimum Tensile strength, Hardness and Ductility were found with the help of S/N ratios. Therefore optimization of input process parameter is required ...
متن کاملProcess Mechanics and Surface Integrity Induced by Dry and Cryogenic Machining of AZ31B-O Magnesium Alloy
The corrosion resistance of magnesium alloys depends mainly on its surface integrity. Previous experimental studies have shown that machining can induces small (nano-scale) grain size, compressive residual stresses and basal plane crystallographic texture, which significantly improve the corrosion resistance of magnesium alloy. These studies have focused on the positive effects of cryogenic coo...
متن کاملThe effect of twinning on texture evolution during ECAP processing of an AM30 magnesium alloy
An AM30 magnesium alloy was processed through ECAP method at 200 °C. Optical and transmission electron microscopy as well as electron back scattered diffraction (EBSD) technique were employed to characterize the deformed microstructure. A partially recrystallized microstructure including ultrafine/nano structures was obtained. The area fraction of 49% was measured for the recrystallized regions...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Key Engineering Materials
سال: 2013
ISSN: 1662-9795
DOI: 10.4028/www.scientific.net/kem.554-557.876