Rupture prediction for induction bend pipes under opening mode bending
نویسندگان
چکیده
منابع مشابه
Pipes under Internal Pressure and Bending
This article covers the general behaviour of a straight uniform pipe, with built-in open ends, subject to internal pressure and in plane bending or curvature. It is intended as a summary of the basic equations driving the unintuitive phenomena of bending and instability of pipes under internal pressure. The analysis covers in addition the investigation of opposite pressure stabilisation effects...
متن کاملCrack opening analysis of complex cracked pipes
Based on the reference stress approach, two sets of the crack opening displacement (COD) estimation equations are proposed for a complex cracked pipe. One set of equations can be used for the case when full stressstrain data are known, and the other for the case when only yield and tensile strengths are available. To define the reference stress, a simple plastic limit analysis for the complex c...
متن کاملMixed-Mode Bending Method for Delamination Testing
A mixed—mode delamination test procedure was developed combining double cantilever beam (DCB) mode I loading and end-notch fixture (ENF) mode II loading on a split unidirectional laminate. By loading with a lever, a single applied load simultaneously produces mode I and mode II bending loads on the specimen. This mixed-mode bending (MMB) test was analyzed using both finite-element procedures an...
متن کاملPrediction of turbulent flow in curved pipes
A finite-difference procedure is employed to predict the development of turbulent flow in curved pipes. The turbulence model used involves the solution of two differential equations, one for the kinetic energy of the turbulence and the other for its dissipation rate. The predicted total-velocity contours for the developing flow in a 180’ bend are compared with the experimental data. Predictions...
متن کاملSoil-Structure Interaction of Buried Pipes Under Cyclic Loading Conditions
The safety of lifelines, as the most important urban facilities, under different conditions highly depends on the safe design and performance of these buried structures. This cannot be achieved unless their actual behaviors are well understood and considered at the designing stage. A new physical model was developed in Amirkabir University of Technology to study the behavior of buried pipes und...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: QUARTERLY JOURNAL OF THE JAPAN WELDING SOCIETY
سال: 2016
ISSN: 0288-4771
DOI: 10.2207/qjjws.34.112