Sacrificial layer microfluidic device fabrication methods
نویسندگان
چکیده
منابع مشابه
Sacrificial-Layer Atomic Layer Deposition for Fabrication of Non-Close-Packed Inverse-Opal Photonic Crystals
Photonic crystals have been studied extensively for their potential to control and manipulate light, similar to the way electrons are controlled in a semiconductor, opening the door to high-speed, low-power, all-optical devices. A common method for fabricating 3D photonic crystals is the infiltration and subsequent inversion of synthetic opal templates to create inverse opals consisting of air ...
متن کاملFabrication of microfluidic hydrogels using molded gelatin as a sacrificial element.
This paper describes a general procedure for the formation of hydrogels that contain microfluidic networks. In this procedure, micromolded meshes of gelatin served as sacrificial materials. Encapsulation of gelatin meshes in a hydrogel and subsequent melting and flushing of the gelatin left behind interconnected channels in the hydrogel. The channels were as narrow as approximately 6 microm, an...
متن کاملFabrication and Performance of a Photonic-Microfluidic Integrated Device
Fabrication and performance of a functional photonic-microfluidic flow cytometer is demonstrated. The devices are fabricated on a Pyrex substrate by photolithographically patterning the microchannels and optics in a SU-8 layer that is sealed via a poly(dimethylsiloxane) (PDMS) layer through a unique chemical bonding method. The resulting devices eliminate the free-space excitation optics throug...
متن کاملControl and automation of multilayered integrated microfluidic device fabrication.
Integrated microfluidics is a sophisticated three-dimensional (multi layer) solution for high complexity serial or parallel processes. Fabrication of integrated microfluidic devices requires soft lithography and the stacking of thin-patterned PDMS layers. Precise layer alignment and bonding is crucial. There are no previously reported standards for alignment of the layers, which is mostly perfo...
متن کاملFabrication of suspended dielectric mirror structures via xenon difluoride etching of an amorphous germanium sacrificial layer
The authors present a simplified fabrication method for the creation of free-standing dielectric mirrors for use in monolithic wavelength tunable surface-normal photonic devices, including vertical-cavity surface emitting lasers. This process utilizes a nonplasma dry etching process, based on the noble gas halide, xenon difluoride XeF2 , to remove an inorganic sacrificial film comprised of low-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: ELECTROPHORESIS
سال: 2006
ISSN: 0173-0835,1522-2683
DOI: 10.1002/elps.200600399