Scalability of mass transfer in liquid–liquid flow

Flow Analysis Heat and Mass Transfer in a Room

This reports the study on the flow behaviour, heat transfer and contamination distribution in a room. For this purpose the 3-D incompressible Navier-Stokes equations, energy equation and a mass transfer equation which model the concentration of contamination have been applied. For turbulence simulation the two equation standard k-  turbulence model was employed. By means of SIMPLE algorithm the...

Experimental measurement of heat transfer coefficient and mass of deposited CaSO4 in subcooled flow boiling condition

Fouling is a common, fundamental and costly problem in heat transfer systems, which reduces thermal efficiency of equipment, increases the energy loss and causes strong damage to the heat transfer equipment in various industries. The main causes of fouling on the heat transfer surfaces are salts with inverse temperature-solubility in the fluid which calcium sulfate is one of the most important ...

experimental investigation of power consumption, mass transfer coefficient and flow regime in gas-liquid dispersion systems

Turbulent Events and Gas-Side Mass Transfer Coefficients in a Wavy Air-Water Stratified Flow

Turbulence structure on the gas side of a wavy stratified flow was experimentally investigated in a near horizontal 18.7 cm (H) 10 cm (W) 5.5m (L) rectangular duct.By applying the Variable Interval Time Averaging (VITA) technique to the hot wire anemometer measurements frequency of occurrence of turbulent events were detected near the air-water interface. Experimental results showed that fr...

Mass Transfer Coefficients in Cross-flow Ultrafiltration

Usually, in concentration polarization models, the mass transfer coefficient is an unknown parameter. Also, its variation with changing experimental circumstances is in question. In the literature, many relationships can be found to describe the mass transfer coefficient under various conditions, as well as various corrections for deviating behaviour during ultrafiltration. To obtain reliable m...