Scan Blindness Analysis of 1D and 2D Ka-Band Printed Dipole Array Antenna
نویسندگان
چکیده
منابع مشابه
Ka Band Transmit Antenna Array
Active antenna arrays working at higher frequencies result in higher packaging densities. The antenna array under consideration operates at about 30 GHz and will be installed in an aircraft. Commercially available power amplifiers at these frequencies have an efficiency of typically 20 %, which results in high amounts of dissipated heat for the required high radiated power. The dissipated power...
متن کاملTriple - Band Printed Dipole Tag Antenna For
Abstract—In this paper, a triple-band printed dipole tag antenna is proposed for Radio Frequency Identification (RFID). The tripleband printed dipole antenna is designed to operate at 0.92GHz, 2.45GHz and 5.8 GHz using Computer Simulation Technology (CST) software. In order to achieve triple-band operation, the proposed antenna contains two branch elements, which act as an additional resonator....
متن کاملan infinite planar array of rectangular microstrip patch antenna analysis
the methods which are used to analyze microstrip antennas, are divited into three categories: empirical methods, semi-empirical methods and full-wave analysis. empirical and semi-empirical methods are generally based on some fundamental simplifying assumptions about quality of surface current distribution and substrate thickness. thses simplificatioms cause low accuracy in field evaluation. ful...
15 صفحه اولDual-band Printed Dipole Antenna Array for an Emergency Rescue System Based on Cellular-phone Localization
This paper describes our contribution in the RNRT project called LUTECE, dedicated to the emergency localisation of cellular phones. This contribution takes place in the field of antennas, with the development of two biband systems : a directive array for the emission part, and a circular array of five elements with separated outputs for the receiving part. Different evolutions of these antenna...
متن کاملTriple-band Printed Dipole Tag Antenna for RFID Application
In this paper, a triple-band printed dipole tag antenna is proposed for RFID application. The tri-band printed dipole antenna is designed at 0.92 GHz, 2.45 GHz and 5.8 GHz using Computer Simulation Technology (CST). In order to achieve triple-band operation, the proposed antenna contains two branch elements, which acts as an additional resonator. The designed antenna was fabricated using Taconi...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: The Journal of Korean Institute of Electromagnetic Engineering and Science
سال: 2019
ISSN: 1226-3133,2288-226X
DOI: 10.5515/kjkiees.2019.30.3.202