Seepage forces and confining pressure effects on piping erosion
نویسندگان
چکیده
منابع مشابه
Numerical computation of seepage erosion below dams (piping)
In delta areas the land is protected from floods and high tides by dikes. In general these are constructed of impervious clays and built on a sandy aquifer as subsoil. Such structures are vulnerable to an erosion effect called piping. The actual word 'piping' refers to the development of shallow channels in the sand below the dike, which begins at the downstream side of the structure. Here ofte...
متن کاملNumerically Predicting Seepage Gradient Forces and Erosion: Sensitivity to SoilHydraulic Properties
Keywords: Groundwater seepage Pedotransfer function ROSETTA Seepage erosion Uncertainty analysis s u m m a r y Research has suggested that streambank seepage can be an important mechanism of bank instability; however, limited information is available on the level of soil characterization necessary to accurately predict seepage gradient forces and erosion. The objective of this research was to q...
متن کاملPiping Forces and Moments on Compressors and Steam Turbines
Engineer of the Turbomachinery Laboratory at Mitsubishi Heavy Industries, Ltd., in Takasago, Japan. He has been involved in the design and development of turbomachinery compressors and expanders as well as combustors and chemical reactors. He is currently engaged in aerodynamic design and testing of special purpose turbomachinery. Mr. Yagi holds B.S. and M.S. degrees from the University of Toky...
متن کاملModeling of piping erosion in loess soils
Extended abstract Introduction Piping erosion is one of the common water erosions usually occurs in soil with low infiltration and soluble minerals that finally changes landscape. Different factors control its occurrence and development. To predict piping occurrence/hazard through modeling, effective factors should be prioritized and considered as inputs of the model. The present study...
متن کاملEffects of temperature and confining pressure on mode II fracture toughness of rocks (Case study: Lushan Sandstone)
The fracture mechanics examines the development and expansion of cracks in solids and how they affect the deformation of materials. The stress intensity factors at the tip of the crack and the critical stress intensity factors or fracture toughness of materials are considered in the relevant criteria. There are three main modes of applying forces to a crack including the tensile mode, shear mod...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Canadian Geotechnical Journal
سال: 2000
ISSN: 0008-3674,1208-6010
DOI: 10.1139/t99-116