Seismic Attributes Method for Prediction of Unconsolidated Sand Reservoirs of Heavy Oil

Seismic Attributes Method for Prediction of Unconsolidated Sand Reservoirs of Heavy Oil

Heavy crude oil is known as oil that is highly viscous and of a higher density than that of conventional oil. Sand reservoirs containing heavy oil generally consist of unconsolidated sediments deposited at a shallow burial depth, with high porosity and permeability. In seismic exploration, acoustic impedance inversion is a commonly used tool in reservoir prediction. However, due to the unconsol...

simulation and experimental studies for prediction mineral scale formation in oil field during mixing of injection and formation water

abstract: mineral scaling in oil and gas production equipment is one of the most important problem that occurs while water injection and it has been recognized to be a major operational problem. the incompatibility between injected and formation waters may result in inorganic scale precipitation in the equipment and reservoir and then reduction of oil production rate and water injection rate. ...

Artificial Intelligence for prediction of porosity from Seismic Attributes: Case study in the Persian Gulf

Porosity is one of the key parameters associated with oil reservoirs. Determination of this petrophysical parameter is an essential step in reservoir characterization. Among different linear and nonlinear prediction tools such as multi-regression and polynomial curve fitting, artificial neural network has gained the attention of researchers over the past years. In the present study, two-dimensi...

Pore throat size characterization of carbonate reservoirs by integrating core data, well logs and seismic attributes

Investigation of pore system properties of carbonate reservoirs has an important role in evaluating the reservoir quality and delineating high production intervals. The current study proposes a three-step approach for pore throat size characterization of these reservoirs, by integrating core data, well logs and 3D seismic volume. In this respect, first the pore throats size was calculated using...

Heavy Oil and Tar Sand Bitumen