Seismic Behavior of Shear Connectors of Steel Vierendeel Sandwich Plate
نویسندگان
چکیده
منابع مشابه
Seismic Behavior of Intermediate Beams in Steel Plate Shear Walls
This paper presents some preliminary results of an ongoing research whose objective is to investigate the seismic behavior of intermediate beams (i.e., the beams other than those at the roof and foundation levels) in multi-story steel plate shear walls (SPSWs). Of primary interest is the determination of the strength level needed to avoid the formation of in-span plastic hinges, a relevant prac...
متن کاملCorner Crack Effect on the Seismic Behavior of Steel Plate Shear Wall System
Although, experimental studies have reported fracture at the corner of Steel Plate Shear Walls (SPSW), no study has been performed to investigate the crack effect, yet. Therefore, in this paper, the effect of crack at the corner of SPSWs on the seismic behavior of the system was investigated. Two probable cracks, that have been studies at the corner of SPSWs utilizing extended Finite Element me...
متن کاملSeismic Performance of Steel Plate-Reinforced Concrete Composite Shear Wall
In tall buildings the reinforced concrete (RC) shear wall is one of the predominant structural components used to resist lateral loads induced by earthquakes around the world. Previous research demonstrated that shear walls displayed a sudden loss in lateral capacity due to the wall corner and web crushing in the plastic zone. In addition, it was found that large shear distortions in shear wall...
متن کاملNon-Linear Behavior and Shear Strength of Diagonally Stiffened Steel Plate Shear Walls
In this study, non-linear behavior of diagonally stiffened steel plate shear walls as a seismic resisting system has been investigated, and theoretical formulas for estimating shear strength capacity of the system have been proposed. Several validated analytical finite element models of steel shear walls with various stiffener dimensions are generated to verify and compare the analytical and th...
متن کاملBehavior of Vertical Boundary Elements in Steel Plate Shear Walls
The AISC Seismic Provisions and CSA S-16 Standard require a minimum moment of inertia for the vertical boundary elements (VBEs) in steel plate shear walls (SPSWs) to avoid undesirable VBE behaviors. The equation limiting VBE flexibility has been derived from a flexibility factor, ωt, developed in plate girder theory and the limit on VBE flexibility has been empirically specified based on previo...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mathematical Problems in Engineering
سال: 2019
ISSN: 1024-123X,1563-5147
DOI: 10.1155/2019/8047393