SEISMIC PERFORMANCE OF REINFORCED CONCRETE BRIDGE PIERS USING ULTRA-HIGH-STRENGTH FIBER-REINFORCED CONCRETE AGAINST BILATERAL EARTHQUAKE MOTION
نویسندگان
چکیده
منابع مشابه
Reinforced Concrete Bridge Piers Subjected to Reversed Cyclic Loading
Sixteen large-scale reinforced concrete specimens without web reinforcements were tested to study the behavior of typical bridge piers subjected to deflection reversals that were large enough to cause extensive yielding of the longitudinal reinforcement. The different parameters considered included shear spanto-depth ratio, percentage of longitudinal reinforcement, frequency of the applied load...
متن کاملDamage Simulation of High Performance Fiber Reinforced Concrete
The simulation of damage and failure in short fiber reinforced composites like high performance hybrid-fiber reinforced cement composites is still a challenging task, due to the richness of failure mechanisms introduced by fibers on the mesoscale of the material. Randomly oriented, hooked steel fibers, like the Baekaert Dramix® fibers, sustainable modify the macroscopic failure behavior of the ...
متن کاملFeasibility of Reducing the Fiber Content in Ultra-High-Performance Fiber-Reinforced Concrete under Flexure
In this study, the flexural behavior of ultra-high-performance fiber-reinforced concrete (UHPFRC) is examined as a function of fiber length and volume fraction. Straight steel fiber with three different lengths (lf) of 13, 19.5, and 30 mm and four different volume fractions (vf) of 0.5%, 1.0%, 1.5%, and 2.0% are considered. Test results show that post-cracking flexural properties of UHPFRC, suc...
متن کاملExperimental investigation of the strength of glass fiber-reinforced concrete exposed to high temperature
This study investigated the effects of high temperature exposure on the compressive, tensile, and flexural strengths of concrete containing glass fiber. A total of 108 cubic specimens (150 mm × 150 mm × 150 mm), cylindrical specimens (300 mm × 150 mm), and prismatic specimens (500 mm × 150 mm × 150 mm) were prepared for compressive, tensile, and flexural strength testing, respectively. The spec...
متن کاملEarthquake Resistant Design of Reinforced Concrete Buildings
This paper briefly reviews the development of earthquake resistant design of buildings. The state-of-the-art of seismic design is discussed from the viewpoint of the performance criteria of buildings. These are (a) serviceability from frequent minor-intensity earthquake motions, (b) repairability from an infrequent but major-intensity earthquake motion, and (c) life safety from the maximum poss...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Doboku Gakkai Ronbunshuu A
سال: 2010
ISSN: 1880-6023
DOI: 10.2208/jsceja.66.435