Seismic Relationships

Capacity-demand Index Relationships for Performance-based Seismic Design

Seismic design procedures in current building provisions are based on linear and nonlinear static approaches that use capacity-demand index relationships such as the relationship between the lateral strength and the maximum lateral displacement. Previous research on the development of these relationships is based on linear-elastic ground motion acceleration response spectra, whereas the current...

The Use of Source Scaling Relationships in the Simulation of a Seismic Scenario in Mexico

Compressional velocity, seismic attenuation and permeability relationships for sandstones from WOSPP

Some experimental results measuring P-wave phase velocity and seismic attenuation in laboratory under dry and water-saturated conditions at ultrasonic frequencies and atmospheric pressure on sandstone samples of the Milk River Formation in the Writingon-Stone Provincial Park (WOSPP), southern Alberta, are presented and are correlated with petrophysical data obtained from these samples as clay c...

Bridge Functionality Relationships for Improved Seismic Risk Assessment of Transportation Networks

Relationships between bridge damage and the resulting loss of functionality of the bridge are critical to assessing the impact of an earthquake event on the performance of the transportation network. This study addresses this data need by use of a Web-based survey of central and southeastern U.S. Department of Transportation bridge inspectors and officials. Results of the 28 responses are analy...

Extracting Seismic Profiles from Background Seismic Signals

The idea of obtaining the seismic trace representing the impulse response at one receiver due to a source at another receiver has discussed by many authors. Jon Claerbout (see e.g. Rickett and Claerbout, 1996; Claerbout, web) introduced the concept to seismology. It has been investigated in the laboratory by Lobkis and Weaver (2001), observed in seismic data by Campillio and Paul (2003), and in...