Selected fracture criteria of elastic-plastic materials
نویسندگان
چکیده
منابع مشابه
Nanomechanical Quantification of Elastic, Plastic, and Fracture Properties of LiCoO2
LiCoO 2 is an important lithium storage compound that adopts a distorted rock-salt structure of the α -NaFeO 2 type. After the discovery of reversible lithium (de)intercalation in this layered host compound by Mizushima et al., [ 1 ] this material became central to the introduction and subsequent development of lithium-ion batteries (LIBs) of high energy and power density. The advantages of LiC...
متن کاملElastic-plastic Mode-ii Fracture of Adhesive Joints
A numerical study of the elastic-plastic mode-II fracture of adhesive joints is presented in this paper. A traction-separation law was used to simulate the mode-II interfacial fracture of adhesively-bonded end-notched flexure (E.N.F.) specimens loaded in three-point bending, with extensive plastic deformation accompanying failure. The fracture parameters for the traction-separation law were det...
متن کاملFracture Mechanisms of a Thin Elastic Plastic Laminate
The fracture toughness of a polymer-metal laminate composite is obtained by mechanical testing of a specimen containing a pre-crack. The laminate is a material used for packaging. It consists of a thin aluminium foil and a polymer coating. A centre cracked panel test geometry is used. Each of the layers forming the laminate is also tested separately. The result is compared with the measured fra...
متن کاملElastic, Plastic, Cracking Aspects of the Hardness of Materials
The hardness properties of materials are tracked from early history until the present time. Emphasis is placed on the hardness test being a useful probe for determining the local elastic, plastic and cracking properties of single crystal, polycrystalline, polyphase or amorphous materials. Beginning from connection made between individual hardness pressure measurements and the conventional stres...
متن کاملElastic-plastic Analysis of Cracks in Pressure-sensitive Materials
In this paper we present an elastic-plastic analysis of the small-scale yielding crack-tip fields for pressure-sensitibe materials. Mode 1 loading and plane-strain conditions are assumed. The yield criterion is chosen to be a linear combination of the effective stress and the hydrostatic stress. For power-law hardening materials. our elastic-plastic finite element analysis shows that HRRtype cr...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Mechanik
سال: 2017
ISSN: 0025-6552
DOI: 10.17814/mechanik.2017.12.201