Selective Electroless Silver Deposition on Graphene Edges
نویسندگان
چکیده
منابع مشابه
Electroless Nickel Deposition: An Alternative for Graphene Contacting.
We report the first investigation into the potential of electroless nickel deposition to form ohmic contacts on single layer graphene. To minimize the contact resistance on graphene, a statistical model was used to improve metal purity, surface roughness, and coverage of the deposited film by controlling the nickel bath parameters (pH and temperature). The metalized graphene layers were pattern...
متن کاملEffects of catalyst introduction methods using PAMAM dendrimers on selective electroless nickel deposition on polyelectrolyte multilayers.
We studied the effects of catalyst introduction methods using poly(amidoamine) (PAMAM) dendrimers on the nickel patterning of polyelectrolyte multilayer (PEM)-coated substrates. Three different approaches to palladium catalyst introduction using microcontact printing as the patterning technique were utilized and compared. The catalyst introduction methods are (1) direct catalyst stamping, (2) d...
متن کاملSelective etching of graphene edges by hydrogen plasma.
We devised a controlled hydrogen plasma reaction at 300 °C to etch graphene and graphene nanoribbons (GNRs) selectively at the edges over the basal plane. Atomic force microscope imaging showed that the etching rates for single-layer and few-layer (≥2 layers) graphene are 0.27 ± 0.05 nm/min and 0.10 ± 0.03 nm/min, respectively. Meanwhile, Raman spectroscopic mapping revealed no D band in the pl...
متن کاملSelective Formation of Zigzag Edges in Graphene Cracks.
We report the thermally induced unconventional cracking of graphene to generate zigzag edges. This crystallography-selective cracking was observed for as-grown graphene films immediately following the cooling process subsequent to chemical vapor deposition (CVD) on Cu foil. Results from Raman spectroscopy show that the crack-derived edges have smoother zigzag edges than the chemically formed gr...
متن کاملEfficient SERS substrates made by electroless silver deposition into patterned silicon structures
A nano fabrication process using caesium chloride in an island lithography scheme has been used to make wells in a silicon dioxide layer on silicon. Silver structures have been made in these wells using an electroless process that involves the reduction of silver ions and oxidation of silicon in the presence of fluoride ions. The silver deposition process is found to be diffusion controlled. Th...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: Journal of The Electrochemical Society
سال: 2015
ISSN: 0013-4651,1945-7111
DOI: 10.1149/2.0571506jes