Selective Oxidation of NH3 to N2 over Cu Catalysts Supported on MFI-type Metallosilicate.
نویسندگان
چکیده
منابع مشابه
CFD modeling for selective formation of propylene from methanol over synthesized Mn-substituted MFI metallosilicate catalyst
The high silica Mn-substituted MFI metallosilicate catalyst with Si/Al molar ratio of 220 and Si/Mn molar ratio of 50 was successfully synthesized by hydrothermal method. The catalyst sample was appropriately characterized by XRD, FE-SEM, EDX and BET techniques. The Mn-substituted MFI metallosilicate has not been reported as the potential catalyst for the methanol to propylene (MTP) reaction. T...
متن کاملThe Selective Catalytic Reduction of NOx with NH3 over Titania Supported Rhenium Oxide Catalysts
Titania supported vanadium oxide catalysts have been demonstrated to be very efficient catalysts for the selective reduction of NOx with NH3 and have found widespread industrial application for the control of NOx emissions from stationary sources (1). Characterization studies have demonstrated that supported vanadium oxide catalysts consist of a two-dimensional metal oxide overlayer on the oxid...
متن کاملPreparation and performance analysis of γ-Al2O3 supported Cu-Ru bimetallic catalysts for the selective Wet Air Oxidation of Aqueous Ammonia to Nitrogen.
Series of Copper Ruthenium (Cu-Ru) bimetallic catalysts supported on γ-Al2O3 with different metal loading are prepared and investigated for catalytic wet air oxidation of ammonia to nitrogen. The ammonia decomposition activity was studied at three different temperatures i.e. 150oC, 200oC, and 230 oC and it is found that catalytic activity increases with the increase in temperature along with th...
متن کاملOxidation of SO2 over Supported Metal Oxide Catalysts
A systematic catalytic investigation of the sulfur dioxide oxidation reactivity of several binary (MxOy/TiO2) and ternary (V2O5/ MxOy/TiO2) supported metal oxide catalysts was conducted. Raman spectroscopy characterization of the supported metal oxide catalysts revealed that the metal oxide components were essentially 100% dispersed as surface metal oxide species. Isolated fourfold coordinated ...
متن کاملCO oxidation on TiO2 supported gold catalysts
The aim within this project was to optimise the CO oxidation over TiO2 supported gold catalysts, focusing on two different preparation methods; deposition precipitation (DP) and photodeposition (PD), using different types of TiO2 and varying the theoretical gold loading. The catalyst were characterised with TEM (size) and ICP-AES (loading). For DP catalysts, the support is important for high ac...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: NIPPON KAGAKU KAISHI
سال: 2001
ISSN: 0369-4577
DOI: 10.1246/nikkashi.2001.37