Selectivity of Sample Preparation by Micro Carbon Residue Method with Heat Transfer Fluids
نویسندگان
چکیده
In heat transfer fluids, the carbon residue value is an indicator that provides its relative coking tendency. The micro method widely used because of simple and convenient operation procedures low pollution. However, when less than 0.1%, sample needs to be prepared then tested in furnace. Therefore, this article aims at measurement by fluids method. classified according product type maximum allowed temperature. pretreatment. for determining residue, whether pretreatment selective.
منابع مشابه
Heat Transfer Fluids
The choice of heat transfer fluids has significant effects on the performance, cost and reliability of solar thermal systems. In this chapter, we evaluate existing heat transfer fluids such as oils and molten salts based on a new figure of merit capturing the combined effects of thermal storage capacity, convective heat transfer characteristics and hydraulic performance of the fluids. Thermal s...
متن کاملheat transfer of nano-fluids as working fluids of swimming pool heat exchangers
the present experimental study reports on enhancement of heat transfer by addition of nanoparticles to the working fluid of commercial swimming pool heat exchangers under laminar flow condition. three different concentrations of titanium dioxide nanoparticles were added to the water as working fluid of a typical forced convective heat exchanger used to transfer heat to public swimming pools. th...
متن کاملHeat Transfer Problems Related with Carbon Nanotubes
Several heat transfer problems related to single-walled carbon nanotubes (SWNTs) are considered using molecular dynamics (MD) simulations. The Brenner potential (Brenner, 1990) with the simplified form (Yamaguchi and Maruyama, 1998) is employed as the potential function between carbon and carbon within a nanotube. MD simulations of thermal conductivity along a nanotube, isotope effect in longit...
متن کاملPreparation of Gd2O3 Ultrafine Nanoparticles by Pulse Electrodeposition Followed by Heat-treatment Method
Gd2O3 nanoparticles were prepared by a two–step process; cathodic electrodeposition followed by heat-treatment method. First, Gd(OH)3 nanoparticles was galvanostatically deposited from nitrate bath on the steel substrate by pulse current (PC) mode. The deposition experiments was conducted at a typical on-time and off-time (ton=1ms and toff=1ms) for 60 min. The electrodeposited precursor was the...
متن کاملDetermination of Thermal Resistance in Three-Dimensional Analysis of Micro-Channel Heat Sink with Non - Newtonian Fluids
Micro-Channel Heat Sink is a heat exchanger which is used to control the temperature of electronic devices with high heat flux. A comprehensive thermal model for the micro-channels should include three dimensional conduction analysis in the solid body together with three dimensional developing fluid flow as well as heat transfer analyses in the fluid section. This paper reports on a research ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
ژورنال
عنوان ژورنال: E3S web of conferences
سال: 2021
ISSN: ['2555-0403', '2267-1242']
DOI: https://doi.org/10.1051/e3sconf/202124503086